Material Safety Data Sheet

TURBINE T SERIES
(10, 15, 22, 32, 46, 68, 100, 150, 220, 320, 460)


Material Identification and Use


Manufacturer's Name NOCO Energy Corp., Inc.
Manufacturer's Address P.O. Box 129, Lisbon, NY  13658
Emergency Phone Number 1-800-424-9300 (Chemtrec)
Supplier's Address P.O. Box 86, Tonawanda, NY  14151
Supplier Emergency Phone Number 1-800-500-6626
Product Name Turbine T Series 
Product Code NOC0697    Turbine T 10
NOC0698    Turbine T 15
NOC0699    Turbine T 22
NOC0700    Turbine T 32
NOC0701    Turbine T 46
NOC0702    Turbine T 68
NOC0706    Turbine T 100
NOC0715    Turbine T 150
NOC1531    Turbine T 220
NOC1532    Turbine T 320
NOC0704    Turbine T 460
Chemical Name and Synonym N/A
Product Use Such applications include hydraulic systems, and air compressors. Especially designed for bearing and lightly loaded gear systems where a quality lubricant is required.


Ingredients


Components Percentage CAS Number Hazard Data
Interchangeable Base Oil 0 - 99 64742-54-7
64742-62-7
64742-65-0
72623-86-0
72623-87-1
OSHA PEL/TWA 5mg/m3 (mist)
ACGIH STEL/TWA 10mg/m3 (mist)
ACGIH TLV/TWA 5mg/m3 (mist)
Proprietary Additive 1 - 3 Proprietary OSHA PEL 5mg/m3 (mist)
ACGIH STEL/TWA 10mg/m3 (mist)
ACGIH TLV/TWA 5mg/m3 (mist)
SARA 311/312:
Health:  Immediate
Health:  Delayed
WHMIS Classification Not Controlled.


Physical Data


Physical State Liquid
Odour and Appearance Light Pale to dark in color, hydrocarbon odor
Specific Gravity 0.835 - 0.895
Vapor Pressure (MM HG @ 20° C) < 0.1 
Vapour Density > 1.0
Evaporation Rate Not Determined
Boiling Point > 315°C  (>599°F)
Freezing Point N/A
pH N/A
Solubility in H20 Insoluble


Fire and Explosion Hazards


Conditions of Flammability Addition of water or foam may cause frothing. Do not cut, drill or weld empty containers.
Extinguishing Media Foam, Water Fog, Dry Chemical, Carbon Dioxide.
Flashpoint and Method of Determination 338°F  (170°C) ,  COC
Flammable Limits in Air % B. V. Upper Not Determined
Flammable Limits in Air % B. V. Lower Not Determined
NFPA - Hazard Class Health:1  Fire:1  Reactivity:0
Hazardous Combustion Products Oxides of Carbon and Sulfur
Unusual Fire an Explosion Hazard Container exposed to intense heat from fires should be cooled with water to prevent vapor pressure build up which could result in container rupture.  Container areas exposed to direct flame contact should be cooled with large quantities of water as needed to prevent weakening of container structure.
Special Fire Fighting Procedures Wear self contained breathing apparatus when fire fighting in a confined space. Cool fire exposed containers with water spray.


Reactivity Data


Chemical Stability Stable
Incompatible Materials Strong oxidizing agents:  Peroxides, Chlorine, Strong Acids, etc. 
Hazardous Decomposition Oxides of sulfur and carbon..
Hazardous Polymerization Material is not known to polymerize.


Health Hazard Information


Routes of Entry
Skin Contact Prolonged or repeated contact with skin may cause mild irritation and possibly dermatitis.
Eye Mildly irritating to eyes.
Inhalation If heated, sprayed or misted, may cause chemical pneumontis.
Ingestion Low toxicity on ingestion. Has laxative effect.
Carcinogenicity Not listed as a carcinogenic.


Emergency and First Aid Procedures


Eyes In case of contact, flush eyes with large amounts of water for at least 15 minutes. Get medical attention.
Skin Wash skin thoroughly with soap and water or waterless hand cleaner. If irritation occurs, get medical attention.
Inhalation If breathing is difficult, remove victim to fresh air, give artificial respiration if not breathing.
Ingestion Do not ingest. If ingested, do not induce vomiting. Get medical attention.


Preventative Measures


Ventilation Requirements Use explosion proof ventilation as required to control vapor concentration..
Respiratory Protection Not required under normal OSHA PEL. Use NIOSH approved respirators to prevent over-exposure.
Eye Protection Safety glasses with side shields or goggles.
Protective Gloves Nitrile gloves provide best protection to hands and arms.
Personal Hygiene Wear effective plant clothing. Contaminated clothing should be removed and washed in soap and water. Cleanse skin thoroughly before meals with soap and water. Shower and eyewash facilities should be accessible.
Note N/A


Environmental Procedures


Spills or Releases If material is spilled or released to the atmosphere, steps should be taken to prevent discharges to streams or sewer systems.  Spills or releases should be reported, if required to the appropriate local, state and federal regulatory agencies.
Disposal Clean up action should be carefully planned and executed. Shipment, storage and/or disposal of waste materials are regulated and action to handle or dispose of spilled or released materials must meet all state, local, and federal rules.
Storage Protect against physical damage. Separate from oxidizing materials. Store in cool well ventilated area of non-combustible construction away from possible sources of ignition.


Regulatory Information


Dept. of Transportation DOT Shipping Name:  NONE 
Hazard Class:  NONE 
ID Number:  NONE
TSCA All Components are Listed on EPA/TSCA Inventory.
CERCLA This product is classified as an oil under section 311.  Spills into or leading to surface water that cause sheen must be reported to the National Response Center at 1-800-424-8802.
RCRA If this product becomes a waste it would not be a hazardous waste by RCRA - 40  CFR 261.  Place in an appropriate disposal facility in compliance with local authorities.
SARA Title III - Section 302 Not Applicable
Section 311/312 Not Applicable
Section 313 Not Applicable


Preparation Date of Material Safety Data Sheet


Prepared By NOCO - Amy Princess / Tony LeBarge Jr.
Phone number of Preparer 1-800-229-6626
Date Prepared 07/26/2000
Revised Date 07/23/2003


Disclaimer


Information presented herein has been compiled from information provided to us by our suppliers and other sources considered to be dependable and is accurate and reliable to the best of our knowledge. Nothing herein is to be construed as recommending any practice or the use of any product in violation of any patent or in violation of any law or regulation. It is the users' responsibility to determine the suitability of any material for a specific purpose and to adopt such safety precautions as may be necessary. We make no warranty as to the results to be obtained in using any material and since conditions of use are not under our control, we must necessarily disclaim all liability with respect to the use of any material supplied by us.