Catalog pricing shown. Please Sign In to see your pricing.

Arcoaire HP Single Phase Split System Deluxe Single Stg 3 Ton 37k BTU Coil 80Pct Gas Furnace 070 MBH 15.2 SEER2

Arcoaire HP Single Phase Split System Deluxe Single Stg 3 Ton 37k BTU Coil 80Pct Gas Furnace 070 MBH 15.2 SEER2
Kit Includes Whip 6' 1/2" 10GA, No Vent Caps, 2" Plastic Pad, 2H/2C Thermostat, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, 6" Heat Pump Riser, Furnace Leveler, PVC Ptrap Kit, Disconnect

This retail set contains

Vendor Name:
Arcoaire
URI Part Number:
Arcoaire HP Single Phase Split System Deluxe Single Stg 3 Ton 37k BTU Coil 80Pct Gas Furnace 070 MBH 15.2 SEER2
Shipping Weight (Lbs.):
200
Energy Star:
Not Energy Star Compliant
Heating Input (BTUH):
070 MBH Heat
Includes:
H4H5S36AKAAA, N80VSL0701716A, EAM4X37L21A, HPKIT5
Nominal Capacity (BTUH):
36000
Cooling Efficiency (EER2):
12
Cooling Efficiency (SEER2):
15.2
Heating Efficiency HSPF2:
7.5 HSPF2
System Indoor Type:
Gas Furnace
System Outdoor Type:
Single Stage
System Coil Configuration:
Multi Position "A" Coil
Furnace Efficiency:
80
System Nominal Tons:
3.0 Ton
AHRI System Number:
210312361
Heat Pump, Single Phase, Split Gas Furnace Single Stage, Multi Position "A" Coil H4H5S/N80VSL/EAM4X

Heat Pump
  • Scroll Compressors on all models
  • Welded Aluminum Tube / Aluminum Fin Coil
  • Improved Efficiency w/ Multi Directional Internal Enhancements
  • Less Sensitivity to Pressure Drop
  • Heat Shrink Wrap Protects Copper / Aluminum Joints
  • AL/AL w/ Zinc Cladding Provides Enhanced Corrosion Protection
  • Approximately 50% Lighter than Copper Coils
  • Bi Flow Filter Drier Supplied for Field Installation
  • Suction Line Accumulator Standard
  • Self Configuring Operation & Text Based Diagnostics w/ Ion Control
  • Compressor Sound Blanket & Isolation Grommets Factory Installed
  • Extended Service Valve to Accommodate Press Fittings
  • High & Low Pressure Switches
  • Outdoor Temp Sensor Factory Installed
  • Factory Charged w/ R410A Refrigerant
  • Long Line Set Capability (refer to spec sheet for details)
  • Low Ambient Cooling Capable w/ Optional Kit
  • Galvanized Steel Cabinet w/ High Gloss, Baked on Powder Coat Paint
  • Corner Posts for Added Cabinet Strength
  • Coated Hail Guard Coil Protection
  • Post Painted (black) Coil
  • Coated Cabinet Screws
  • Reliable Time / Temperature Defrost Control
  • Internal Pressure Relief Valve & Internal Thermal Overload

Gas Furnace

  • Hi efficiency VCT Variable Speed Constant Torque Motor
  • Dehumidification Feature
  • Supports Single & 2 Stage Cooling
  • Insulated Blower Compartment
  • Four position - up flow/down flow/horizontal installation
  • 33-1/3” (847mm) high
  • Electronic Air Cleaner & Humidifier terminals
  • Factory shipped for natural gas, LP conversion kits available
  • Category I venting (Common venting with other Category I appliances)
  • Three position inducer elbow capability
  • Masonry chimney adapter available
  • Through the casing flue pipe for counter flow applications RELIABLE
  • RPJ Aluminized steel heat exchanger
  • In-shot burners
  • Direct ignition on with Silicon Nitride igniter
  • Innovative knobs for easy door removal and secure attachment
  • Self diagnostics

Evaporator Coil

  • Thermostatic Expansion Valve (TXV)
  • Multi-position airflow design
  • Sturdy galvanized steel cabinet
  • Non-ozone-depleting R-410A refrigerant
  • Capacity: 1.5 - 5 tons
  • Cased A coil design for efficient heat transfer in a compact size
  • Corrosion-resistant all-aluminum coil
  • Fully insulated cabinet
  • Corrosion-free sloped drain pan design helps reduce mold and bacterial buildup