1. Home/
  2. R410A Systems/
  3. Arcoaire AC Single Phase Split System Deluxe Multi Stg 2 Ton 24k BTU Coil 96Pct Gas Furnace 100 MBH 16 SEER2 V2
  View Compare ( 0 )
Log in for pricing and inventory.

Arcoaire AC Single Phase Split System Deluxe Multi Stg 2 Ton 24k BTU Coil 96Pct Gas Furnace 100 MBH 16 SEER2 V2

Arcoaire AC Single Phase Split System Deluxe Multi Stg 2 Ton 24k BTU Coil 96Pct Gas Furnace 100 MBH 16 SEER2 V2
Call To Order
Log in for pricing and inventory
Kit Includes PVC Ptrap Kit, Drain Pan Float Switch, BIP Gas Cock, Electrical Box, Switch, Receptical & Duplex Cover, Whip, Disconnect, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, No Vent Caps, 2" Plastic Pad, 30x60 Goliath Drain Pan, 2H/2C Thermostat
Regional Add to Job List
Vendor Name:
Arcoaire
URI Part Number:
Arcoaire AC Single Phase Split System Deluxe Multi Stg 2 Ton 24k BTU Coil 96Pct Gas Furnace 100 MBH 16 SEER2 V2
Energy Star:
Energy Star 6.1 Compliant: 15.2 SEER2, 12.0 EER2
Heating Input (BTUH):
100 MBH Heat
Includes:
H4A7T24AKAWA, N96VSN1002120A, EHD4X24AAL, ACGKIT2H
Nominal Capacity (BTUH):
24000
Cooling Efficiency (EER2):
12.5
Cooling Efficiency (SEER2):
16
Heating Efficiency HSPF2:
A/C is Energy Star 6.1 compliant
System Indoor Type:
Gas Furnace
System Outdoor Type:
Multi Stage
System Coil Configuration:
Horizontal Slab
Furnace Efficiency:
96
System Nominal Tons:
2
AHRI System Number:
210694987
Weight (Lbs):
200
Shipping Weight (Lbs):
200
A/C, Single Phase, Split Gas Furnace Multi Stage, Horizontal Slab H4A7T/N96VSN/EHD4X

Air Conditioner Condenser
  • 2 Stage Copeland Scroll Ultratech Compressor
  • Welded Aluminum Tube / Aluminum Fin Coil
  • Improved Efficiency w/ Multi Directional Internal Enhancements
  • Less Sensitivity to Pressure Drop
  • Heat Shrink Wrap Protects Copper / Aluminum Joints
  • AL/AL w/ Zinc Cladding Provides Enhanced Corrosion Protection
  • Approximately 50% Lighter than Copper Coils
  • Filter Drier Supplied for Field Installation
  • Self Configuring Operation & Text Based Diagnostics w/ Ion Control
  • Compressor Sound Blanket & Isolation Grommets Factory Installed
  • Extended Service Valve to Accommodate Press Fittings
  • High & Low Pressure Switches
  • Outdoor Temp Sensor Factory Installed
  • Factory Charged w/ R410A Refrigerant
  • Long Line Set Capability (refer to spec sheet for details)
  • Low Ambient Cooling Capable w/ Optional Kit
  • Galvanized Steel Cabinet w/ High Gloss, Baked on Powder Coat Paint
  • Corner Posts for Added Cabinet Strength
  • Coated Hail Guard Coil Protection
  • Post Painted (black) Coil
  • Coated Cabinet Screws
  • Internal Pressure Relief Valve & Thermal Overload

Gas Furnace

  • Fully insulated steel cabinet
  • Dehumidification feature in cooling
  • Certified to leak 2% or less of nominal air conditioning CFM delivered (when pressured to 1 inch water column with all present air inlets, air outlets, and condensate drain port(s) sealed
  • VCT Constant Torque Variable Speed Motor
  • Supports Single & Two Stage A/C
  • Aluminized steel RPJ primary heat exchanger
  • Stainless Steel Secondary Heat Exchanger
  • Direct ignition with Silicon Nitride ignitor
  • Direct vent (2-pipe), single-pipe venting, or ventilated combustion air
  • 35" (889mm) high, for ease of installation
  • Four position - upflow/downflow/horizontal (left/right) installation
  • At least twelve different venting configurations
  • Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)
  • Self diagnostics with super bright LED
  • Concentric vent available
  • Twining capable (select sizes) w/ kit
Evaporator Coil
  • Thermostatic Expansion Valve (TXV)
  • Horizontal bi-directional airflow design
  • Sturdy galvanized steel cabinet
  • Non-ozone-depleting R-410A refrigerant
  • Capacity: 2 - 5 tons
  • Cased horizontal slab coil design for bi-directional airflow
  • Corrosion-resistant all-aluminum coil
  • Fully insulated cabinet
  • Corrosion-free sloped drain pan design helps reduce mold and bacterial buildup