Catalog pricing shown. Please Sign In to see your pricing.

Arcoaire AC Single Phase Split System Deluxe Single Stg 2.5 Ton 36k BTU Coil 96Pct Furnace 080 MBH 15.5 SEER2

Arcoaire AC Single Phase Split System Deluxe Single Stg 2.5 Ton 36k BTU Coil 96Pct Furnace 080 MBH 15.5 SEER2
Kit Includes PVC Ptrap Kit, BIP Gas Cock, Electrical Box, Switch, Receptical & Duplex Cover, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, Whip 6' 1/2" 10GA, No Vent Caps, 2" Plastic Pad, Furnace Leveler, 2H/2C Thermostat, Disconnect

This retail set contains

Vendor Name:
Arcoaire
URI Part Number:
Arcoaire AC Single Phase Split System Deluxe Single Stg 2.5 Ton 36k BTU Coil 96Pct Furnace 080 MBH 15.5 SEER2
Shipping Weight (Lbs.):
200
Energy Star:
Energy Star 6.1 Compliant: 15.2 SEER2, 12.0 EER2
Heating Input (BTUH):
080 MBH Heat
Includes:
H4A6S30AKAWA, F96CTN0801714A, EVM4X36M17A, ACGKIT2
Nominal Capacity (BTUH):
30000
Cooling Efficiency (EER2):
12.5
Cooling Efficiency (SEER2):
15.5
Heating Efficiency HSPF2:
A/C is Energy Star 6.1 compliant
System Indoor Type:
Low Nox Gas Furnace
System Outdoor Type:
Single Stage
System Coil Configuration:
Multi Position Power "V"
Furnace Efficiency:
96
System Nominal Tons:
2.5 Ton
AHRI System Number:
210028996
A/C, Single Phase, Split Gas Furnace Single Stage, Multi Position Power "V" H4A6S/F96CTN/EVM4X

Air Conditioner Condenser
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80ESL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride igniter
  • One piece prepainted steel cabinet
  • In-shot burners
  • 33 1/3” (847mm) high, for ease of installation
  • Quarter turn knobs for easy door removal and secure attachment
  • Factory shipped for natural gas, convertible to propane with accessory kit
  • Four position - upflow/downflow/horizontal (left/right) installation
  • Three position inducer elbow capability
  • Through the casing flue pipe for counterflow applications
  • Common venting with other Category I appliances
  • Masonry chimney adapter available
  • Self diagnostics
  • Slide out blower assembly

Gas Furnace

  • Two stage operation
  • Constant CFM (variable speed ) blower
  • Dehumification feature in cooling
  • Supports single & two-stage cooling units
  • Two-speed induced draft combusion blower
  • Fully insulated steel cabinet
  • Certified to leak 2% or less of nominal air conditioning CFM delivered when pressurized to 1 inch water column with all present air inlets, air outlets, and condensate drain port(s) sealed
  • RPJ aluminized steel primary heat exchanger
  • Stainless steel secondary heat exchanger
  • Direct ignition with Silicon Nitride ignitor
  • Direct vent (2-pipe), single-pipe venting, or ventilated combustion air
  • 35" (889mm) high, for ease of installation
  • Four position - upflow/downflow/horizontal (left/right) installation
  • At least twelve different venting configurations
  • Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)
  • Self diagnostics with super bright LED
Evaporator Coil
  • Corrosion Resistant Aluminum
  • Low Pressure Drop
  • TXV metering device factory installed
  • Compact design, shorter than A-coils
  • Hemmed flanges for safer handling
  • Cabinets meet or exceed 2% air leakage codes
  • UV knockout
  • No delta plate allows easy cleaning
  • 30-40% Lighter than “A” Coils
  • 80% Fewer Factory Braze Joints vs. “N” Coils
  • V Design Reduces Cabinet Sweating
  • Helium leak tested @ the factory