Log in for pricing and inventory.

Arcoaire AC Single Phase Split System Deluxe Single Stg 2.5 Ton 37k BTU Coil Only 14.3 SEER2 V2

Arcoaire AC Single Phase Split System Deluxe Single Stg 2.5 Ton 37k BTU Coil Only 14.3 SEER2 V2
Kit Includes PVC Ptrap Kit, Whip 6' 1/2" 10GA, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, No Vent Caps, 2" Plastic Pad, 2H/2C Thermostat, Disconnect

This retail set contains

  • H4A6S30AKAWA product photo
    H4A6S30AKAWA
    Product ID: H4A6S30AKAWA
    Single-Stage Air Conditioner with R-410A Refrigerant 2.5T Deluxe Model Standard Southwest AC
  • EAM4X37L21A product photo
    EAM4X37L21A
    Product ID: EAM4X37L21A
    CASED evaporator coil multi poise R410A aluminum TXV 3.0 tons 21
  • ACOKIT2 product photo
    ACOKIT2
    Product ID: ACOKIT2
    A/C COND UNIT & COIL KIT INSTALL KIT
Vendor Name:
Arcoaire
URI Part Number:
Arcoaire AC Single Phase Split System Deluxe Single Stg 2.5 Ton 37k BTU Coil Only 14.3 SEER2 V2
Shipping Weight (Lbs.):
200
Energy Star:
Not Energy Star Compliant
Includes:
H4A6S30AKAWA, EAM4X37L21A, ACOKIT2
Nominal Capacity (BTUH):
30000
Cooling Efficiency (EER2):
11.7
Cooling Efficiency (SEER2):
14.3
System Indoor Type:
Coil Only
System Outdoor Type:
Single Stage
System Coil Configuration:
Multi Position "A" Coil
System Nominal Tons:
2.5 Ton
AHRI System Number:
207934921
A/C, Single Phase, Split Coil Only Single Stage, Multi Position "A" Coil H4A6S/EAM4X

Air Conditioner Condenser
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80ESL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride igniter
  • One piece prepainted steel cabinet
  • In-shot burners
  • 33 1/3” (847mm) high, for ease of installation
  • Quarter turn knobs for easy door removal and secure attachment
  • Factory shipped for natural gas, convertible to propane with accessory kit
  • Four position - upflow/downflow/horizontal (left/right) installation
  • Three position inducer elbow capability
  • Through the casing flue pipe for counterflow applications
  • Common venting with other Category I appliances
  • Masonry chimney adapter available
  • Self diagnostics
  • Slide out blower assembly
Evaporator Coil
  • Corrosion resistant aluminum tube
  • Bolt-on TXV metering device factory installed on all models (equalizer tube brazed in)
  • TXV and manifold positioned to the side for easier cleaning
  • Innovative drain pan design for complete water removal
  • Two condensate drain connections (Additional two for horizontal installation)
  • 2-piece delta plate for easier removal and cleaning
  • Cabinet widths match flush with Arcoaire gas furnaces
  • Hemmed flanges for safer handling
  • Foil faced insulation
  • Non-sweat cabinet, even at extreme conditions
  • Cabinets meet or exceed 2% air leakage codes
  • Sturdy, 22 gauge, pre-painted steel cabinet
  • One or two UV light knock-outs provided on cabinet (depending on size)