Catalog pricing shown. Please Sign In to see your pricing.

Arcoaire AC Single Phase Split System Deluxe Single Stg 2.5 Ton 42k BTU Coil 97Pct Low Nox Gas Furnace 060 MBH 15.2 SEER2

Arcoaire AC Single Phase Split System Deluxe Single Stg 2.5 Ton 42k BTU Coil 97Pct Low Nox Gas Furnace 060 MBH 15.2 SEER2
Kit Includes PVC Ptrap Kit, BIP Gas Cock, Electrical Box, Switch, Receptical & Duplex Cover, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, Whip 6' 1/2" 10GA, No Vent Caps, 2" Plastic Pad, Furnace Leveler, 2H/2C Thermostat, Disconnect

This retail set contains

Vendor Name:
Arcoaire
URI Part Number:
Arcoaire AC Single Phase Split System Deluxe Single Stg 2.5 Ton 42k BTU Coil 97Pct Low Nox Gas Furnace 060 MBH 15.2 SEER2
Shipping Weight (Lbs.):
200
Energy Star:
Energy Star 6.1 Compliant: 15.2 SEER2, 12.0 EER2
Heating Input (BTUH):
060 MBH Heat
Includes:
H4A6S30AKAWA, F97CMN0601714A, EAM4X42L21A, ACGKIT2
Nominal Capacity (BTUH):
30000
Cooling Efficiency (EER2):
12.5
Cooling Efficiency (SEER2):
15.2
Heating Efficiency HSPF2:
A/C is Energy Star 6.1 compliant
System Indoor Type:
Low Nox Gas Furnace
System Outdoor Type:
Single Stage
System Coil Configuration:
Multi Position "A" Coil
Furnace Efficiency:
97
System Nominal Tons:
2.5 Ton
AHRI System Number:
207935748
A/C, Single Phase, Split Gas Furnace Single Stage, Multi Position "A" Coil H4A6S/F97CMN/EAM4X

Air Conditioner Condenser
  • Scroll Compressors on all models
  • Welded Aluminum Tube / Aluminum Fin Coil
  • Improved Efficiency w/ Multi Directional Internal Enhancements
  • Less Sensitivity to Pressure Drop
  • Heat Shrink Wrap Protects Copper / Aluminum Joints
  • AL/AL w/ Zinc Cladding Provides Enhanced Corrosion Protection
  • Approximately 50% Lighter than Copper Coils
  • Filter Drier Supplied for Field Installation
  • Self Configuring Operation & Text Based Diagnostics w/ Ion Control
  • Compressor Sound Blanket & Isolation Grommets Factory Installed
  • Extended Service Valve to Accommodate Press Fittings
  • High & Low Pressure Switches
  • Outdoor Temp Sensor Factory Installed
  • Factory Charged w/ R410A Refrigerant
  • Long Line Set Capability (refer to spec sheet for details)
  • Low Ambient Cooling Capable w/ Optional Kit
  • Galvanized Steel Cabinet w/ High Gloss, Baked on Powder Coat Paint
  • Corner Posts for Added Cabinet Strength
  • Coated Hail Guard Coil Protection
  • Post Painted (black) Coil
  • Coated Cabinet Screws
  • Internal Pressure Relief Valve & Internal Thermal Overload
Gas Furnace
  • Modulating (40-100%) Heating Operation
  • Ion Communicating Control System
  • Xtra SEER Variable speed ECM blower motor
  • Supports single, two-stage & inverter cooling units
  • Dehumidification feature in cooling
  • Fully insulated steel cabinet
  • Certified to leak 2% or less of nominal air conditioning CFM delivered (when pressurized to 1inch water column with all present air inlets, air outlets, and condensate drain port(s) sealed)
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • Direct ignition with Silicon Nitride ignitor
  • Direct vent (2-pipe), single-pipe venting or ventilated combustion air
  • 35” (889mm) high, for ease of installation
  • Four position - upflow/downflow/horizontal (left/right) installation
  • At least twelve different venting configurations
  • Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately) Self-configuring and communicating control
  • Concentric vent available
Evaporator Coil
  • Corrosion resistant aluminum tube
  • Bolt-on TXV metering device factory installed on all models (equalizer tube brazed in)
  • TXV and manifold positioned to the side for easier cleaning
  • Innovative drain pan design for complete water removal
  • Two condensate drain connections (Additional two for horizontal installation)
  • 2-piece delta plate for easier removal and cleaning
  • Cabinet widths match flush with Arcoaire gas furnaces
  • Hemmed flanges for safer handling
  • Foil faced insulation
  • Non-sweat cabinet, even at extreme conditions
  • Cabinets meet or exceed 2% air leakage codes
  • Sturdy, 22 gauge, pre-painted steel cabinet
  • One or two UV light knock-outs provided on cabinet (depending on size)