Catalog pricing shown. Please Sign In to see your pricing.

Arcoaire AC Single Phase Split System Deluxe Single Stg 2 Ton 24k BTU Coil 95Pct Gas Furnace 060 MBH 15.2 SEER2 V1

Arcoaire AC Single Phase Split System Deluxe Single Stg 2 Ton 24k BTU Coil 95Pct Gas Furnace 060 MBH 15.2 SEER2 V1
Kit Includes PVC Ptrap Kit, Drain Pan Float Switch, BIP Gas Cock, Electrical Box, Switch, Receptical & Duplex Cover, Whip, Disconnect, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, No Vent Caps, 2" Plastic Pad, 30x60 Goliath Drain Pan, 2H/2C Thermostat

This retail set contains

Vendor Name:
Arcoaire
URI Part Number:
Arcoaire AC Single Phase Split System Deluxe Single Stg 2 Ton 24k BTU Coil 95Pct Gas Furnace 060 MBH 15.2 SEER2 V1
Shipping Weight (Lbs.):
200
Energy Star:
Energy Star 6.1 Compliant: 15.2 SEER2, 12.0 EER2
Heating Input (BTUH):
060 MBH Heat
Includes:
H4A6S24AKAWA, N95ESN0601412A, EHD4X24AAL, ACGKIT2H
Nominal Capacity (BTUH):
24000
Cooling Efficiency (EER2):
12.5
Cooling Efficiency (SEER2):
15.2
Heating Efficiency HSPF2:
A/C is Energy Star 6.1 compliant
System Indoor Type:
Gas Furnace
System Outdoor Type:
Single Stage
System Coil Configuration:
Horizontal Slab
Furnace Efficiency:
95
System Nominal Tons:
2.0 Ton
AHRI System Number:
208088188
A/C, Single Phase, Split Gas Furnace Single Stage, Horizontal Slab H4A6S/N95ESN/EHD4X

Air Conditioner Condenser
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80ESL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride igniter
  • One piece prepainted steel cabinet
  • In-shot burners
  • 33 1/3” (847mm) high, for ease of installation
  • Quarter turn knobs for easy door removal and secure attachment
  • Factory shipped for natural gas, convertible to propane with accessory kit
  • Four position - upflow/downflow/horizontal (left/right) installation
  • Three position inducer elbow capability
  • Through the casing flue pipe for counterflow applications
  • Common venting with other Category I appliances
  • Masonry chimney adapter available
  • Self diagnostics
  • Slide out blower assembly

Gas Furnace

  • Efficient multi-speed ECM blower motor
  • Single speed induced draft combustion motor
  • Single-stage gas valve
  • RPJ® (Rigid Press Joint) primary heat exchanger, stainless steel secondary heat exchanger
  • Sound-reducing features: soft mounted blower and inducer motor
  • Compatible thermostat: heat/cool
  • Heating capacity: 40,000–120,000 BTUh
  • Single-stage operation and fixed speed blower motor for even levels of temperature control and comfort
  • Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Air purifier and humidifier compatible
  • High temperature limit control prevents overheating
Evaporator Coil
  • Thermostatic Expansion Valve (TXV)
  • Horizontal bi-directional airflow design
  • Sturdy galvanized steel cabinet
  • Non-ozone-depleting R-410A refrigerant
  • Capacity: 2 - 5 tons
  • Cased horizontal slab coil design for bi-directional airflow
  • Corrosion-resistant all-aluminum coil
  • Fully insulated cabinet
  • Corrosion-free sloped drain pan design helps reduce mold and bacterial buildup