Catalog pricing shown. Please Sign In to see your pricing.
Arcoaire HP Single Phase Split System Deluxe Single Stg 2.5 Ton 37k BTU Coil 96Pct Furnace 080 MBH 15.2 SEER2 V1
Arcoaire HP Single Phase Split System Deluxe Single Stg 2.5 Ton 37k BTU Coil 96Pct Furnace 080 MBH 15.2 SEER2 V1
Kit Includes Whip 6' 1/2" 10GA, No Vent Caps, 2" Plastic Pad, 2H/2C Thermostat, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, 6" Heat Pump Riser, Furnace Leveler, PVC Ptrap Kit, Disconnect
Motor Freight
- Vendor Name:
- Arcoaire
- URI Part Number:
- Arcoaire HP Single Phase Split System Deluxe Single Stg 2.5 Ton 37k BTU Coil 96Pct Furnace 080 MBH 15.2 SEER2 V1
- Shipping Weight (Lbs.):
- 200
- Energy Star:
- Energy Star 6.1 Compliant: 15.2 SEER2, 11.7 EER2, 7.8 HSPF2
- Heating Input (BTUH):
- 080 MBH Heat
- Includes:
- H4H5S30AKAAA, F96VTN0802120A, EAM4X37L21A, HPKIT5
- Nominal Capacity (BTUH):
- 30000
- Cooling Efficiency (EER2):
- 12.5
- Cooling Efficiency (SEER2):
- 15.2
- Heating Efficiency HSPF2:
- 7.8 HSPF2
- System Indoor Type:
- Gas Furnace
- System Outdoor Type:
- Single Stage
- System Coil Configuration:
- Multi Position "A" Coil
- Furnace Efficiency:
- 96
- System Nominal Tons:
- 2.5 Ton
- AHRI System Number:
- 210309475
Heat Pump, Single Phase, Split Gas Furnace Single Stage, Multi Position "A" Coil H4H5S/F96VTN/EAM4X
Heat Pump
Heat Pump
- Scroll Compressors on all models
- Welded Aluminum Tube / Aluminum Fin Coil
- Improved Efficiency w/ Multi Directional Internal Enhancements
- Less Sensitivity to Pressure Drop
- Heat Shrink Wrap Protects Copper / Aluminum Joints
- AL/AL w/ Zinc Cladding Provides Enhanced Corrosion Protection
- Approximately 50% Lighter than Copper Coils
- Bi Flow Filter Drier Supplied for Field Installation
- Suction Line Accumulator Standard
- Self Configuring Operation & Text Based Diagnostics w/ Ion Control
- Compressor Sound Blanket & Isolation Grommets Factory Installed
- Extended Service Valve to Accommodate Press Fittings
- High & Low Pressure Switches
- Outdoor Temp Sensor Factory Installed
- Factory Charged w/ R410A Refrigerant
- Long Line Set Capability (refer to spec sheet for details)
- Low Ambient Cooling Capable w/ Optional Kit
- Galvanized Steel Cabinet w/ High Gloss, Baked on Powder Coat Paint
- Corner Posts for Added Cabinet Strength
- Coated Hail Guard Coil Protection
- Post Painted (black) Coil
- Coated Cabinet Screws
- Reliable Time / Temperature Defrost Control
- Internal Pressure Relief Valve & Internal Thermal Overload
Gas Furnace
- Two-stage heating operation
- Two-speed induced draft combustion blower
- Supports single- and two-stage cooling units
- Dehumidification feature (A/C)
- Fully insulated steel cabinet
- Certified to leak 2% or less of nominal air conditioning CFM delivered (when pressurized to 1 inch water column with all present air inlets, air outlets, and condensate drain port(s) sealed)
- VCT Variable Speed Constant Torque Motor
- Aluminized steel RPJ primary heat exchanger
- Stainless steel secondary heat exchanger
- Direct ignition with Silicon Nitride ignitor
- Direct vent (2-pipe), single-pipe venting, or ventilated combustion air
- 35” (889mm) high , for ease of installation
- Four position - upflow/downflow/horizontal (left/right) installation
- At least twelve different venting configurations
- Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)
- Self-configuring and communicating control
- Concentric vent available
- Twining Capable (select size) w/ kit
Evaporator Coil
- Thermostatic Expansion Valve (TXV)
- Multi-position airflow design
- Sturdy galvanized steel cabinet
- Non-ozone-depleting R-410A refrigerant
- Capacity: 1.5 - 5 tons
- Cased A coil design for efficient heat transfer in a compact size
- Corrosion-resistant all-aluminum coil
- Fully insulated cabinet
- Corrosion-free sloped drain pan design helps reduce mold and bacterial buildup