Catalog pricing shown. Please Sign In to see your pricing.

Arcoaire HP Single Phase Split System Multi Stg 2.5 Ton 42k BTU Coil 80Pct Gas Furnace 070 MBH 14.5 SEER2 V2

Arcoaire HP Single Phase Split System Multi Stg 2.5 Ton 42k BTU Coil 80Pct Gas Furnace 070 MBH 14.5 SEER2 V2
Kit Includes whip 6' 3/4" 6GA, No Vent Caps, 3" Plastic Pad, Surge Protector, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, 6" Heat Pump Riser, PVC Trap Kit, Furnace Leveler, 2H/2C Thermostat, Disconnect

This retail set contains

Vendor Name:
Arcoaire
URI Part Number:
Arcoaire HP Single Phase Split System Multi Stg 2.5 Ton 42k BTU Coil 80Pct Gas Furnace 070 MBH 14.5 SEER2 V2
Shipping Weight (Lbs.):
200
Energy Star:
Not Energy Star Compliant
Heating Input (BTUH):
070 MBH Heat
Includes:
DLCURAH30ABK, N80VSL0702120A, EAM4X42L24A, HPKIT41
Nominal Capacity (BTUH):
30000
Cooling Efficiency (EER2):
9
Cooling Efficiency (SEER2):
14.5
Heating Efficiency HSPF2:
8.1 HSPF2
System Indoor Type:
Gas Furnace
System Outdoor Type:
Multi Stage
System Coil Configuration:
Multi Position "A" Coil
Furnace Efficiency:
80
System Nominal Tons:
2.5 Ton
AHRI System Number:
211712659
Heat Pump, Single Phase, Split Gas Furnace Multi Stage, Multi Position "A" Coil DLCURAH/N80VSL/EAM4X

Heat Pump Inverter
  • Utilize expansion device on the indoor unit
  • Insulate suction line only
  • Anti corrosion coating
  • Built in algorithm learns and adapts
  • Monitors suction pressure/temperature (super heat) to regulatecompressor speed
  • Field adjustable timer (ramps up to 100% if thermostat not satisfied)
  • Automatically ramps up/down 30-120% rated capacity
  • Field set sw 1-3 to A/C only
  • Low ambient cooling to -22°F
  • Pre charged for 25' tubing
Gas Furnace
  • Hi efficiency VCT Variable Speed Constant Torque Motor
  • Dehumidification Feature
  • Supports Single & 2 Stage Cooling
  • Insulated Blower Compartment
  • Four position - up flow/down flow/horizontal installation
  • 33-1/3” (847mm) high
  • Electronic Air Cleaner & Humidifier terminals
  • Factory shipped for natural gas, LP conversion kits available
  • Category I venting (Common venting with other Category I appliances)
  • Three position inducer elbow capability
  • Masonry chimney adapter available
  • Through the casing flue pipe for counter flow applications
  • RPJ Aluminized steel heat exchanger
  • In-shot burners
  • Direct ignition on with Silicon Nitride igniter
  • Innovative knobs for easy door removal and secure attachment
  • Self diagnostics
Evaporator Coil
  • Thermostatic Expansion Valve (TXV)
  • Multi-position airflow design
  • Sturdy galvanized steel cabinet
  • Non-ozone-depleting R-410A refrigerant
  • Capacity: 1.5 - 5 tons
  • Cased A coil design for efficient heat transfer in a compact size
  • Corrosion-resistant all-aluminum coil
  • Fully insulated cabinet
  • Corrosion-free sloped drain pan design helps reduce mold and bacterial buildup