Catalog pricing shown. Please Sign In to see your pricing.

Arcoaire HP Single Phase Split System Multi Stg 2 Ton 36k BTU Coil 80Pct Gas Furnace 045 MBH 16 SEER2 V5

Arcoaire HP Single Phase Split System Multi Stg 2 Ton 36k BTU Coil 80Pct Gas Furnace 045 MBH 16 SEER2 V5
Kit Includes whip 6' 3/4" 6GA, No Vent Caps, 3" Plastic Pad, Surge Protector, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, 6" Heat Pump Riser, PVC Trap Kit, Furnace Leveler, 2H/2C Thermostat, Disconnect

This retail set contains

Vendor Name:
Arcoaire
URI Part Number:
Arcoaire HP Single Phase Split System Multi Stg 2 Ton 36k BTU Coil 80Pct Gas Furnace 045 MBH 16 SEER2 V5
Shipping Weight (Lbs.):
200
Energy Star:
Not Energy Star Compliant
Heating Input (BTUH):
045 MBH Heat
Includes:
DLCURAH24AAK, N80VSL0451412A, END4X36L17A, HPKIT40
Nominal Capacity (BTUH):
24000
Cooling Efficiency (EER2):
9.5
Cooling Efficiency (SEER2):
16
Heating Efficiency HSPF2:
7.7 HSPF2
System Indoor Type:
Gas Furnace
System Outdoor Type:
Multi Stage
System Coil Configuration:
Vertical "N" Coil
Furnace Efficiency:
80
System Nominal Tons:
2.0 Ton
AHRI System Number:
211639907
Heat Pump, Single Phase, Split Gas Furnace Multi Stage, Vertical "N" Coil DLCURAH/N80VSL/END4X

Heat Pump Inverter
  • Utilize expansion device on the indoor unit
  • Insulate suction line only
  • Anti corrosion coating
  • Built in algorithm learns and adapts
  • Monitors suction pressure/temperature (super heat) to regulatecompressor speed
  • Field adjustable timer (ramps up to 100% if thermostat not satisfied)
  • Automatically ramps up/down 30-120% rated capacity
  • Field set sw 1-3 to A/C only
  • Low ambient cooling to -22°F
  • Pre charged for 25' tubing
Gas Furnace
  • Hi efficiency VCT Variable Speed Constant Torque Motor
  • Dehumidification Feature
  • Supports Single & 2 Stage Cooling
  • Insulated Blower Compartment
  • Four position - up flow/down flow/horizontal installation
  • 33-1/3” (847mm) high
  • Electronic Air Cleaner & Humidifier terminals
  • Factory shipped for natural gas, LP conversion kits available
  • Category I venting (Common venting with other Category I appliances)
  • Three position inducer elbow capability
  • Masonry chimney adapter available
  • Through the casing flue pipe for counter flow applications
  • RPJ Aluminized steel heat exchanger
  • In-shot burners
  • Direct ignition on with Silicon Nitride igniter
  • Innovative knobs for easy door removal and secure attachment
  • Self diagnostics
Evaporator Coil
  • Thermostatic Expansion Valve (TXV)
  • Vertical upflow/downflow design
  • Sturdy galvanized steel cabinet
  • Non-ozone-depleting R-410A refrigerant
  • Capacity: 1.5 - 5 tons
  • Cased N coil design for efficient heat transfer in a compact size
  • Corrosion-resistant all-aluminum coil
  • Fully insulated cabinet
  • Corrosion-free sloped drain pan design helps reduce mold and bacterial buildup