Catalog pricing shown. Please Sign In to see your pricing.

Arcoaire HP Single Phase Split System Multi Stg 2 Ton 37k BTU Coil 96Pct Gas Furnace 060 MBH 16.5 SEER2 V3

Arcoaire HP Single Phase Split System Multi Stg 2 Ton 37k BTU Coil 96Pct Gas Furnace 060 MBH 16.5 SEER2 V3
Kit Includes whip 6' 3/4" 6GA, No Vent Caps, 3" Plastic Pad, Surge Protector, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, 6" Heat Pump Riser, PVC Trap Kit, Furnace Leveler, 2H/2C Thermostat, Disconnect

This retail set contains

Vendor Name:
Arcoaire
URI Part Number:
Arcoaire HP Single Phase Split System Multi Stg 2 Ton 37k BTU Coil 96Pct Gas Furnace 060 MBH 16.5 SEER2 V3
Shipping Weight (Lbs.):
200
Energy Star:
Not Energy Star Compliant
Heating Input (BTUH):
060 MBH Heat
Includes:
DLCURAH24ABK, N96VSN0601714A, EAM4X37L21A, HPKIT40
Nominal Capacity (BTUH):
24000
Cooling Efficiency (EER2):
10
Cooling Efficiency (SEER2):
16.5
Heating Efficiency HSPF2:
8.5 HSPF2
System Indoor Type:
Gas Furnace
System Outdoor Type:
Multi Stage
System Coil Configuration:
Multi Position "A" Coil
Furnace Efficiency:
96
System Nominal Tons:
2.0 Ton
AHRI System Number:
211243220
Heat Pump, Single Phase, Split Gas Furnace Multi Stage, Multi Position "A" Coil DLCURAH/N96VSN/EAM4X

Heat Pump Inverter
  • Utilize expansion device on the indoor unit
  • Insulate suction line only
  • Anti corrosion coating
  • Built in algorithm learns and adapts
  • Monitors suction pressure/temperature (super heat) to regulatecompressor speed
  • Field adjustable timer (ramps up to 100% if thermostat not satisfied)
  • Automatically ramps up/down 30-120% rated capacity
  • Field set sw 1-3 to A/C only
  • Low ambient cooling to -22°F
  • Pre charged for 25' tubing
Gas Furnace
  • Fully insulated steel cabinet
  • Dehumidification feature in cooling
  • Certified to leak 2% or less of nominal air conditioning CFM delivered (when pressured to 1 inch water column with all present air inlets, air outlets, and condensate drain port(s) sealed)
  • VCT Constant Torque Variable Speed Motor
  • Supports Single & Two Stage A/C
  • Aluminized steel RPJ primary heat exchanger
  • Stainless Steel Secondary Heat Exchanger
  • Direct ignition with Silicon Nitride ignitor Easier to install and service
  • Direct vent (2-pipe), single-pipe venting, or ventilated combustion air
  • 35” (889mm) high, for ease of installation
  • Four position - upflow/downflow/horizontal (left/right) installation
  • At least twelve different venting configurations
  • Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)
  • Self diagnostics with super bright LED
  • Concentric vent available
  • Twining capable (select sizes) w/ kit
Evaporator Coil
  • Thermostatic Expansion Valve (TXV)
  • Multi-position airflow design
  • Sturdy galvanized steel cabinet
  • Non-ozone-depleting R-410A refrigerant
  • Capacity: 1.5 - 5 tons
  • Cased A coil design for efficient heat transfer in a compact size
  • Corrosion-resistant all-aluminum coil
  • Fully insulated cabinet
  • Corrosion-free sloped drain pan design helps reduce mold and bacterial buildup