Catalog pricing shown. Please Sign In to see your pricing.
Arcoaire AC Single Phase Split System Deluxe Single Stg 2.5 Ton 36k BTU Coil 80Pct Gas Furnace 090 MBH 15.2 SEER2 V9
Arcoaire AC Single Phase Split System Deluxe Single Stg 2.5 Ton 36k BTU Coil 80Pct Gas Furnace 090 MBH 15.2 SEER2 V9
Kit Includes PVC Ptrap Kit, BIP Gas Cock, Electrical Box, Switch, Receptical & Duplex Cover, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, Whip 6' 1/2" 10GA, No Vent Caps, 2" Plastic Pad, Furnace Leveler, 2H/2C Thermostat, Disconnect
Motor Freight
- Vendor Name:
- Arcoaire
- URI Part Number:
- Arcoaire AC Single Phase Split System Deluxe Single Stg 2.5 Ton 36k BTU Coil 80Pct Gas Furnace 090 MBH 15.2 SEER2 V9
- Shipping Weight (Lbs.):
- 200
- Energy Star:
- Energy Star 6.1 Compliant: 15.2 SEER2, 12.0 EER2
- Heating Input (BTUH):
- 090 MBH Heat
- Includes:
- H4A6S30AKAWA, N80MSN0901714A, EVD4X36M21A, ACGKIT2
- Nominal Capacity (BTUH):
- 30000
- Cooling Efficiency (EER2):
- 12.5
- Cooling Efficiency (SEER2):
- 15.2
- Heating Efficiency HSPF2:
- A/C is Energy Star 6.1 compliant
- System Indoor Type:
- Gas Furnace
- System Outdoor Type:
- Single Stage
- System Coil Configuration:
- Vertical Power "V"
- Furnace Efficiency:
- 80
- System Nominal Tons:
- 2.5 Ton
- AHRI System Number:
- 211885762
A/C, Single Phase, Split Gas Furnace Single Stage, Horizontal Slab H4A6S/N80MSN/EHD4X
Air Conditioner Condenser
Air Conditioner Condenser
- 80% AFUE
- Flame roll-out sensors standard
- Category I venting
- Blocked vent switch
- Louvered door
- 24 VAC and 115 VAC humidifier terminal
- Electronic air cleaner terminal
- Select sizes approved for twinning, refer to accessory kit listing
- N80ESL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
- Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
- Adjustable heating blower OFF delay
- Factory set blower ON delay
- RPJ aluminized steel heat exchanger
- High temperature limit control designed to prevent overheating
- Direct ignition with Silicon Nitride igniter
- One piece prepainted steel cabinet
- In-shot burners
- 33 1/3” (847mm) high, for ease of installation
- Quarter turn knobs for easy door removal and secure attachment
- Factory shipped for natural gas, convertible to propane with accessory kit
- Four position - upflow/downflow/horizontal (left/right) installation
- Three position inducer elbow capability
- Through the casing flue pipe for counterflow applications
- Common venting with other Category I appliances
- Masonry chimney adapter available
- Self diagnostics
- Slide out blower assembly
Gas Furnace
- Four position – up flow/down flow/horizontal installation
- 33-1/3” (847mm) high
- Electronic Air Cleaner & Humidifier terminals
- Factory shipped for natural gas, LP conversion kits available
- 18 speed EC constant torque motor (Set up w/ app)
- Twinning capable (select sizes) w/ kit
- Category I venting (Common venting with other Category I appliances)
- Three position inducer elbow capability
- Masonry chimney adapter available
- Through the casing flue pipe for counter flow applications
- RPJ Aluminized steel heat exchanger
- In–shot burners
- Direct ignition with Silicon Nitride igniter
- <2% all leakage @ 1" WC (ASHRAE 193)
- Innovative knobs for easy door removal and secure attachment
- Self diagnostics (3 digit code)
- Thermostatic Expansion Valve (TXV)
- Horizontal bi-directional airflow design
- Sturdy galvanized steel cabinet
- Non-ozone-depleting R-410A refrigerant
- Capacity: 2 - 5 tons
- Cased horizontal slab coil design for bi-directional airflow
- Corrosion-resistant all-aluminum coil
- Fully insulated cabinet
- Corrosion-free sloped drain pan design helps reduce mold and bacterial buildup