Catalog pricing shown. Please Sign In to see your pricing.

Arcoaire AC Single Phase Split System Deluxe Single Stg 3 Ton 42k BTU Coil 80Pct Furnace 100 MBH 15.5 SEER2

Arcoaire AC Single Phase Split System Deluxe Single Stg 3 Ton 42k BTU Coil 80Pct Furnace 100 MBH 15.5 SEER2
Kit Includes PVC Ptrap Kit, BIP Gas Cock, Electrical Box, Switch, Receptical & Duplex Cover, Whip 6' 1/2" 10GA, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, No Vent Caps, 2" Plastic Pad, Furnace Leveler, 2H/2C Thermostat, Disconnect

This retail set contains

Vendor Name:
Arcoaire
URI Part Number:
Arcoaire AC Single Phase Split System Deluxe Single Stg 3 Ton 42k BTU Coil 80Pct Furnace 100 MBH 15.5 SEER2
Shipping Weight (Lbs.):
200
Energy Star:
Energy Star 6.1 Compliant: 15.2 SEER2, 12.0 EER2
Heating Input (BTUH):
100 MBH Heat
Includes:
H4A6S36AKAWA, N80ESU1002120A, EVM4X42M21A, ACGKIT4
Nominal Capacity (BTUH):
36000
Cooling Efficiency (EER2):
13
Cooling Efficiency (SEER2):
15.5
Heating Efficiency HSPF2:
A/C is Energy Star 6.1 compliant
System Indoor Type:
ULN Gas Furnace
System Outdoor Type:
Single Stage
System Coil Configuration:
Multi Position Power "V
Furnace Efficiency:
80
System Nominal Tons:
3
AHRI System Number:
210068600
A/C, Single Phase, Split Gas Furnace Single Stage, Multi Position Power "V" H4A6S/N80ESL/EVM4X

Air Conditioner Condenser
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80ESL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride igniter
  • One piece prepainted steel cabinet
  • In-shot burners
  • 33 1/3” (847mm) high, for ease of installation
  • Quarter turn knobs for easy door removal and secure attachment
  • Factory shipped for natural gas, convertible to propane with accessory kit
  • Four position - upflow/downflow/horizontal (left/right) installation
  • Three position inducer elbow capability
  • Through the casing flue pipe for counterflow applications
  • Common venting with other Category I appliances
  • Masonry chimney adapter available
  • Self diagnostics
  • Slide out blower assembly

Gas Furnace

  • Efficient multi-speed ECM blower motor
  • Variable-speed induced draft combustion motor
  • Single-stage gas valve
  • Natural Gas only, not convertible to Liquid Propane
  • 4 Way Multipoise
  • Stainless steel heat exchanger
  • Reliable direct gas ignition with silicon nitride ignitor
  • High temperature limit control helps prevent overheating
  • Solid, pre-painted steel cabinet with tight fit door latch system
  • Sound-reducing features: fully insulated cabinet with soft mounted blower and inducer motor
  • Compatible thermostat: heat/cool with humidity sensing
  • Heating capacity: 40,000 - 100,000 BTUh
Evaporator Coil
  • Corrosion Resistant Aluminum
  • Low Pressure Drop
  • TXV metering device factory installed
  • Compact design, shorter than A-coils
  • Hemmed flanges for safer handling
  • Cabinets meet or exceed 2% air leakage codes
  • UV knockout
  • No delta plate allows easy cleaning
  • 30-40% Lighter than “A” Coils
  • 80% Fewer Factory Braze Joints vs. “N” Coils
  • V Design Reduces Cabinet Sweating
  • Helium leak tested @ the factory