Catalog pricing shown. Please log in to see your pricing.

LETG0400BEK

LETG0400BEK
Call To Order
Unit cooler, walk-in, 6 FPI, electric defrost, low profile, electronically commutated motors, glycol, 208-230/1/60 volt, 15" H x 15" W x 45-1/2" L
URI Part Number:
LETG0400BEK
Vendor Name:
Bohn
Length (In.):
45 1/2
Width (In.):
15
Capacity (BTUH):
8,400/4.4/4.1
CFM:
1400
Connection Size Inlet (In.):
7/8
Connection Size Outlet (In.):
7/8
Connection Type:
ODS
Fins/Inch:
6
Heater Amps:
7.8
Heater Watts:
1800
Height (In.):
15
Motor Type:
EC
Number of Motors:
2
Rating Selection:
35 degree F room temperature, 4 circuits 3/8" tube, 4.4 GPM fluid, 7.4 psi fluid delta P, 4.1 degree F fluid temperature rise
Sort:
9.2
Voltage:
208-230/1/60
Shipping Weight (Lbs.):
68

Designed to maintain room temperatures from -20°F to +34°F. Their low silhouette and flush-to-ceiling mounting makes them ideal for use in low ceiling freezers or coolers with limited headroom. Use LET (6 FPI) in rooms where light or medium frost loads are expected. Use LLE (4 FPI) in rooms with heavy frost loads. Features include heavy aluminum casing and stainless steel screws for corrosion resistance, molded fan guards for ease in cleaning and directional air flow, and complete factory wiring of defrost components.
New design allows easy front access to electrical and refrigeration components. More volume in electrical cavity for component installation. Heaters are attached to coil... no need to disconnect from electrical board to drop drain pan

  • MK models ship with PSC motors; BEK models ship with electronically commutated motors (EC)
  • Height: 15" + drain pan slope and spud
  • Depth: 12" + fan guard (6")
  • Capacity 10°F T.D.


  • Low temperature, electric defrost
  • 6 FPI
  • BEK models ship with electronically commutated motors (EC)
  • Capacity: rated at 35°F room temperature, indicated fluid GPM, fluid pressure difference is approximately 7.5 psi, assumes 35% propylene at +20°F, +20°F entering fluid temperature, indicated leaving fluid temperature rise
    Please contact Customer Service for capacities at specifications other than above
Installation Instructions

Specification Sheet