Catalog pricing shown. Please log in to see your pricing.

THP200PTT3A

THP200PTT3A
Call To Order
Unit cooler, walk-in, 4 FPI, hot gas defrost, 3-pipe with electric heater, 200000 BTUH +25°F ET, 208-230/3/60 volt, 57-9/32" H x 40-1/2" W x 200" L
URI Part Number:
THP200PTT3A
Vendor Name:
Trenton Refrigeration Products
Length (In.):
187
Width (In.):
40 1/2
BTUH +10°F at 10°F T.D.:
196,000
BTUH 25°F at 10°F T.D.:
200,000
CFM:
38100
Connection Size Inlet (In.):
1 3/8
Connection Suction (In.):
2 5/8
Connection Type:
ODS
Fins/Inch:
4
Heater Amps:
35.4
Heater MCA:
44.2
Heater Watts:
14100
Height (In.):
57 9/32
Maximum Fuse / Breaker Size (Amps):
50
Motor FLA:
22.4
Motor Horsepower:
1.5
Motor Maximum Fuse (Amps):
35
Motor MCA:
30.1
Motor Type:
ODP
Number of Motors:
4
Sort:
109.0
Voltage:
208-230/3/60
Shipping Weight (Lbs.):
1558

Standard Features

  • Heavy gauge textured aluminum cabinet with galvanized steel hangers, support channels and end plates
  • Hinged access panels with removable hinge pins and captive fasteners.
  • Hinged drain pan with removable hinge pins
  • Rugged heavy-gauge galvanized steel rail motor mount / support.
  • Stackable design
  • Schrader fitting and external equalizer line.
  • Factory installed solenoid valve wire harness
  • Unit shipped upright for convenient handling and quick installation.

Optional Features

  • Factory mounted TX valve, solenoid valve and thermostat
  • Throw boosters
  • Insulated drain pan
  • TEFC motors
  • Optional fin spacing
  • Optional fin materials
  • Optional coil coating

    Available in sizes from 59,000 to 256,000 BTUH.
    • Adjustable defrost termination thermostat
    • Heater safety thermostat
    • Fixed fan delay thermostat
    • Maximum fuse is for heater circuits only; motor fusing listed separately
      Standard units are equiped with an electric heater (hot gas drain pan loop optional) and are suitable for three pipe or reverse cycle applications.
      Replace (*) with letter code to completely specify required configuration
      T = 3 Pipe with Electric Heater
      G = Reverse Cycle with Electric Heater