Catalog pricing shown. Please Sign In to see your pricing.

TLP104WAS1B

TLP104WAS1B
Call To Order
Unit cooler, walk-in, glycol, low profile, PSC motors, 2500 BTUH 25°F, 115/1/60 volt, 15-7/8" H x 15" W x 30-1/4" L
Vendor Name:
Trenton Refrigeration Products
URI Part Number:
TLP104WAS1B
Length (In.):
30 1/4
Width (In.):
15
Height (In.):
15 7/8
Shipping Weight (Lbs.):
45
Capacity (BTUH):
2500
CFM:
1010
Connection Type:
ODS
Connection Water Inlet (In.):
7/8
Connection Water Outlet (In.):
7/8
Fins/Inch:
6
Motor FLA:
1
Motor MCA:
1.3
Motor Type:
PSC
Number of Motors:
1
Voltage:
115/1
Prop65:
WARNING: This product can expose you to chemicals including Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Standard Features

  • Modern look
  • High efficiency and high strength fan guard
  • Front access
  • Higher capacity
  • Compact
  • Internally enhanced tubing
  • More uniform air flow
  • Convenient mounting brackets
  • Ample electrical and header compartments
  • B(R)* models use PSC motors
  • B(R)*-EC2 models use electronically commutated motors with SmartSpeed® which meet FEISA Act HR6 (2007)
  • Proven motor/fan/motor mount design
  • Liquid line solenoid valve wire harness factory installed
  • Schrader valve on suction header extension outside the cabinet
  • Positive slope, hinged drain pan, central drain connections (approximate)
  • Universal drain fitting
  • Large 3/4" ID (3/4" MPT) drain hole
  • Factory installed distributor nozzle
  • 460/1/60 PSC motor only

Optional Features

  • Wire fan guard
  • SmartSpeed® Technology (Patent Pending) for EC motors
  • Compatibility with SmartVap™ Electronically Controlled System
  • Heresite coating
  • Copper or GW aluminum “Gold Coat” Fins
  • Wire fan guard
  • Painted cabinet

Smart Speed

SmartSpeed® motors consume 60 watts/motor on cycle but only 13 watts/motor during the off cycle and offer an average of 28% savings over single speed ECM motors. Standard on all low profile TLP, TPLP models with electronically commutated motors



Capacities rated using 30% propylene glycol with 25°F glycol entering temperature, 35°F air entering temperature at 15 GPM (US). For all other conditions please use "Pi-Coil" software (contact URI customer service)

Documents

Related Products