Catalog pricing shown. Please log in to see your pricing.

THP108MGT5A

THP108MGT5A
Call To Order
No Longer Available
Unit cooler, walk-in, 6 FPI, hot gas defrost, reverse cycle with electric heater, 108000 BTUH +25°F ET, 575/3/60 volt, 53-1/32" H x 40-1/2" W x 99" L
Vendor Name:
Trenton Refrigeration Products
URI Part Number:
THP108MGT5A
Length (In.):
99
Width (In.):
40 1/2
Height (In.):
53 1/32
Shipping Weight (Lbs.):
816
BTUH +10°F at 10°F T.D.:
105,800
BTUH 25°F at 10°F T.D.:
108,000
CFM:
15900
Connection Size Inlet (In.):
1 3/8
Connection Suction (In.):
2 1/8
Connection Type:
ODS
Fins/Inch:
6
Heater Amps:
7.4
Heater MCA:
9.2
Heater Watts:
7350
Maximum Fuse / Breaker Size (Amps):
15
Motor FLA:
4.6
Motor Horsepower:
1.5
Motor Maximum Fuse (Amps):
15
Motor MCA:
5.2
Motor Type:
ODP
Number of Motors:
2
Voltage:
575/3/60
Prop65:
WARNING: This product can expose you to chemicals including Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Standard Features

  • Heavy gauge textured aluminum cabinet with galvanized steel hangers, support channels and end plates
  • Hinged access panels with removable hinge pins and captive fasteners.
  • Hinged drain pan with removable hinge pins
  • Rugged heavy-gauge galvanized steel rail motor mount / support.
  • Stackable design
  • Schrader fitting and external equalizer line.
  • Factory installed solenoid valve wire harness
  • Unit shipped upright for convenient handling and quick installation.

Optional Features

  • Factory mounted TX valve, solenoid valve and thermostat
  • Throw boosters
  • Insulated drain pan
  • TEFC motors
  • Optional fin spacing
  • Optional fin materials
  • Optional coil coating


Available in sizes from 67,900 to 271,000 BTUH.

  • Adjustable defrost termination thermostat
  • Heater safety thermostat (on models with heaters)
  • Fixed fan delay thermostat
    Standard units are equiped with an electric heater (hot gas drain pan loop optional) and are suitable for three pipe or reverse cycle applications
  • Maximum fuse is for heater circuits only; motor fusing listed separately
    Replace (*) with letter code to completely specify required configuration
    T = 3 Pipe with Electric Heater
    G = Reverse Cycle with Electric Heater
Fuse Guide

Specification Sheet