Catalog pricing shown. Please log in to see your pricing.

THP187VRT5A

THP187VRT5A
Call To Order
No Longer Available
Unit cooler, walk-in, 4 FPI, hot gas defrost, reverse cycle with loop, 187000 BTUH -20°F ET, 575/3/60 volt, 57-9/32" H x 40-1/2" W x 187" L
Vendor Name:
Trenton Refrigeration Products
URI Part Number:
THP187VRT5A
Length (In.):
187
Width (In.):
40 1/2
Height (In.):
57 9/32
Shipping Weight (Lbs.):
1601
BTUH -20°F at 10°F T.D.:
187,000
CFM:
36600
Comments:
Reverse Cycle w/ Loop
Connection Size Inlet (In.):
1 5/8
Connection Suction (In.):
3 1/8
Connection Type:
ODS
Fins/Inch:
4
Heater Amps:
Heater MCA:
N/A
Heater Watts:
N/A
Motor FLA:
9.2
Motor MCA:
9.8
Motor Type:
ODP
Number of Motors:
4
Voltage:
575/3/60
Prop65:
WARNING: This product can expose you to chemicals including Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Standard Features

  • Heavy gauge textured aluminum cabinet with galvanized steel hangers, support channels and end plates
  • Hinged access panels with removable hinge pins and captive fasteners.
  • Hinged drain pan with removable hinge pins
  • Rugged heavy-gauge galvanized steel rail motor mount / support.
  • Stackable design
  • Schrader fitting and external equalizer line.
  • Factory installed solenoid valve wire harness
  • Unit shipped upright for convenient handling and quick installation.

Optional Features

  • Factory mounted TX valve, solenoid valve and thermostat
  • Throw boosters
  • Insulated drain pan
  • TEFC motors
  • Optional fin spacing
  • Optional fin materials
  • Optional coil coating


Available in sizes from 55,000 to 217,000 BTUH.

  • Adjustable defrost termination thermostat
  • Heater safety thermostat (on models with heaters)
  • Fixed fan delay thermostat
    Standard units are equiped with either an electric heater or hot gas drain pan loop and are suitable for three pipe or reverse cycle applications.
    Replace (*) with letter code to completely specify required configuration
    T = 3 Pipe with Electric Heater
    G = Reverse Cycle with Electric Heater
    H = 3 Pipe with Loop
    R = Reverse Cycle with Loop
Fuse Guide

Specification Sheet