Catalog pricing shown. Please log in to see your pricing.

TMP245WAS2

TMP245WAS2
Call To Order
No Longer Available
Unit cooler, walk-in, glycol, air defrost, medium profile, 22800 BTUH 25°F, 208-230/1/60 volt, 27-3/4" H x 20-3/4" W x 84-1/4" L
Vendor Name:
Trenton Refrigeration Products
URI Part Number:
TMP245WAS2
Length (In.):
84 1/4
Width (In.):
20 3/4
Height (In.):
27 3/4
Shipping Weight (Lbs.):
258
Capacity (BTUH):
22800
CFM:
5980
Connection Type:
ODS
Connection Water Inlet (In.):
1 5/8
Connection Water Outlet (In.):
1 5/8
Fins/Inch:
6
Motor FLA:
3.4
Motor MCA:
3.8
Motor Type:
PSC
Number of Motors:
2
Voltage:
208-230/1/60
Prop65:
WARNING: This product can expose you to chemicals including Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Standard Features

  • Modern look
  • Totally enclosed high efficiency PSC motors, variable speed EC motor (208-230 or 460) (-EC2 models use electronically commutated motors with SmartSpeed®)
  • High efficiency and high strength fan guard
  • Hinged doors
  • Compact
  • Internally enhanced tubing
  • More uniform air flow
  • Ample electrical and header compartments
  • Proven motor/fan/motor mount design
  • Liquid line solenoid valve wire harness factory installed
  • Schrader valve on suction header
  • Adjustable Fan Delay on medium temp. Electric Defrost units
  • Positive slope, hinged drain pan, central drain connections (approximate)
  • Universal drain fitting
  • Large 3/4" ID (3/4" MPT) drain hole
  • Shipped in upright position
  • Factory installed distributor nozzle

Optional Features

  • SmartSpeed® Technology (Patent Pending) for EC motors
  • Wire fan guard
  • Factory installed expansion valve, solenoid valve and room thermostat

Smart Speed

SmartSpeed® motors consume 60 watts/motor on cycle but only 13 watts/motor during the off cycle and offer an average of 28% savings over single speed ECM motors. Standard on all medium profile TMP models with electronically commutated motors



Capacities rated using 30% propylene glycol with 25°F glycol entering temperature, 35°F air entering temperature at 40 GPM (US). For all other conditions please use "Pi-Coil" software (contact URI customer service)

Specification Sheet

Fuse Guide