1. Home/
  2. AC and Heating Equipment/
  3. Evaporative Cooling/
  4. Residential/
  5. Down Discharge/
  6. PD4802
  View Compare ( 0 )
Log in for pricing and inventory.

PD4802

PD4802
Log in for pricing and inventory
Evaporative cooler, residential, Pro, down discharge, 3/4 HP 4,800 CFM, 42" W x 43" D x 27-5/16" H, 115/1/60
Please note an alternative model exists for this Part Number. Please see the Supersedes tab.
Regional Add to Job List
Voltage :
115/1
longDescription :
  • High quality architectural grade Peblar XT® finish
  • Pro-Armor: The premier single inlet cooler with polymeric inner structure that completely shields the wet section from corrosive interaction.
  • Pro-Series thermostat for fully automatic control.
  • Pro Clean System provides sump dump pump for cyclic dumping of sump water, keeping the cooler free of harmful mineral build up.
  • Galvanized sheet steel is zinc coated at weights rated G40 or G90
  • Evaporative media used in the UL Listed models is rated to UL900, Class 2
  • These units are equipped with High Efficiency Rigid Media pads. Evaporative media is corrugated cellulose material, impregnated with insoluble antirot salts and rigidifying saturates.
  • Bearings have an L10 bearing life of 39,000 hours
  • Electrical service knockouts are 1/2".
  • Water supply line is 1/4" O.D. on both sides.
  • Bottom pan drain is 3/4" male hose thread.
  • All models ship with pump and motor installed.
  • Pro-Shield weatherizing panel inhibits heat loss and cold air from entering your home during the off season.
Engineered Items :
Yes
LTL Only :
Yes
manufacturerName :
Phoenix Mfg
Web Description :
Evaporative cooler, residential, Pro, down discharge, 3/4 HP 4,800 CFM, 42" W x 43" D x 27-5/16" H, 115/1/60
Branch Pickup Only :
No
Horsepower :
3/4
Web Search :
Volt
manufacturerSKU :
PD4802
Specials :
No
LogoImage :
L/Logo_phoenix.jpg
Sort :
4.0
SKU :
PD4802
Vendor Name:
Phoenix Mfg
Weight :
177.0 lb
Specials Description :
Evaporative cooler, residential, Pro, down discharge, 3/4 HP 4,800 CFM, 42" W x 43" D x 27 5/16" H, 115/1/60
URI Part Number:
PD4802
Vendor Part Number:
PD4802
Depth (In.):
43
Width (In.):
42
Height (In.):
27 5/16
Industry Standard CFM:
4800
Shipping Weight (Lbs):
177.00
Weight (Lbs):
177.00
  • High quality architectural grade Peblar XT® finish
  • Pro-Armor: The premier single inlet cooler with polymeric inner structure that completely shields the wet section from corrosive interaction.
  • Pro-Series thermostat for fully automatic control.
  • Pro Clean System provides sump dump pump for cyclic dumping of sump water, keeping the cooler free of harmful mineral build up.
  • Galvanized sheet steel is zinc coated at weights rated G40 or G90
  • Evaporative media used in the UL Listed models is rated to UL900, Class 2
  • These units are equipped with High Efficiency Rigid Media pads. Evaporative media is corrugated cellulose material, impregnated with insoluble antirot salts and rigidifying saturates.
  • Bearings have an L10 bearing life of 39,000 hours
  • Electrical service knockouts are 1/2".
  • Water supply line is 1/4" O.D. on both sides.
  • Bottom pan drain is 3/4" male hose thread.
  • All models ship with pump and motor installed.
  • Pro-Shield weatherizing panel inhibits heat loss and cold air from entering your home during the off season.
Supersedes