Log in for pricing and inventory.

RGEAZR030AJT061NAAJA

RGEAZR030AJT061NAAJA
Package Gas Electric Single-Stage ResiPack Convertible Constant Torque with R410A 2.5T 208-230/1/60
Vendor Name:
Thermal Zone
URI Part Number:
RGEAZR030AJT061NAAJA
Vendor Part Number:
RGEAZR030AJT061NAAJA
Depth (In.):
52.44
Width (In.):
47.56
Height (In.):
35.94
Shipping Weight (Lbs.):
444.00
CFM:
2400
Cooling Capacity (BTUH):
30000
Heating Capacity (BTUH):
60000
Hertz:
60
Nominal Tons:
2.5
Phase:
1
Refrigerant:
R410A
Sound Rating Decibels:
79
Voltage:
208/230
Cooling Efficiency (EER2):
10.6
Cooling Efficiency (SEER2):
13.4
  • All models feature Scroll ® compressors for maximum efficiency and quiet operation.
  • Louvered condenser compartment for protecting the coil against yard hazards and/or weather extremes.
  • One-piece top with a deep flange to help keep water out of the unit.
  • Supply and return air openings feature a one-inch tall flange to prevent water migration into the ductwork.
  • Access panels have “weep holes” and channels to further help manage water run-off.
  • Side and down discharge options available on all models. All models are shipped ready for horizontal application.
  • Easily accessible blower section complete with slide-out blower.
  • Refrigerant connections are conveniently located for easy service diagnostics.
  • Environmentally friendly R-410A refrigerant.
  • Micro Channel evaporator and condenser delivers superior performance with less refrigerant charge and less weight than conventional copper tube/aluminum fin coils.
  • Inside the easily accessible furnace compartment is the draft inducer motor. This motor is specially designed for quiet reliable operation. In addition to the draft inducer motor, the in-shot gas burners and manifold efficiently regulate the flow of gas for combustion. These new gas/electric units also feature direct-spark ignition and remote flame sensors for added reliability and efficiency.
  • All units feature an internal trap on the condensate line eliminating the need for installing an on-site external trap.
  • Single point wiring simplifies installation.
  • Feature a tubular heat exchanger design. Tubular heat exchangers are more efficient and durable than older-style clamshell heat exchangers. The heat exchanger is backed by a 10 year limited warranty.
  • Thermal expansion valve standard on all models for superior superheat control, reliability, and energy efficiency at all operating conditions.
  • Filter drier standard on all models.
  • Rugged baserail included for improved installation and handling
  • Complete factory charged, wired and run tested.
  • Molded compressor plugs.
  • A double sloped evaporator coil drain pan assures all water is removed from the unit to improve indoor air quality
Substitutes Documents