Arcoaire AC Single Phase Split System Deluxe Single Stg 3 Ton 36k BTU 80Pct ULN Gas Furnace 100 MBH 15.2 SEER2 V1

Vendor Name:

Arcoaire

URI Part Number:

Arcoaire AC Single Phase Split System Deluxe Single Stg 3 Ton 36k BTU 80Pct ULN Gas Furnace 100 MBH 15.2 SEER2 V1

Shipping Weight (Lbs.):

200

Energy Star:

Energy Star 6.1 Compliant: 15.2 SEER2, 12.0 EER2

Heating Input (BTUH):

100 MBH Heat

Includes:

H4A6S36AKAWA, N80ESU1002120A, EHD4X36AAL, ACGKIT4H

Nominal Capacity (BTUH):

36000

Cooling Efficiency (EER2):

12.5

Cooling Efficiency (SEER2):

15.2

Heating Efficiency HSPF2:

A/C is Energy Star 6.1 compliant

System Indoor Type:

ULN Gas Furnace

System Outdoor Type:

Single Stage

System Coil Configuration:

Horizontal Slab

Furnace Efficiency:

80

System Nominal Tons:

3.0 Ton

AHRI System Number:

207996283

• 80% AFUE
• Flame roll-out sensors standard
• Category I venting
• Blocked vent switch
• Louvered door
• 24 VAC and 115 VAC humidifier terminal
• Electronic air cleaner terminal
• Select sizes approved for twinning, refer to accessory kit listing
• N80ESL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
• Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
• Adjustable heating blower OFF delay
• Factory set blower ON delay
• RPJ aluminized steel heat exchanger
• High temperature limit control designed to prevent overheating
• Direct ignition with Silicon Nitride igniter
• One piece prepainted steel cabinet
• In-shot burners
• 33 1/3” (847mm) high, for ease of installation
• Quarter turn knobs for easy door removal and secure attachment
• Factory shipped for natural gas, convertible to propane with accessory kit
• Four position - upflow/downflow/horizontal (left/right) installation
• Three position inducer elbow capability
• Through the casing flue pipe for counterflow applications
• Common venting with other Category I appliances
• Masonry chimney adapter available
• Self diagnostics
• Slide out blower assembly

Gas Furnace

• Efficient multi-speed ECM blower motor
• Variable-speed induced draft combustion motor
• Single-stage gas valve
• Natural Gas only, not convertible to Liquid Propane
• 4 Way Multipoise
• Stainless steel heat exchanger
• Reliable direct gas ignition with silicon nitride ignitor
• High temperature limit control helps prevent overheating
• Solid, pre-painted steel cabinet with tight fit door latch system
• Sound-reducing features: fully insulated cabinet with soft mounted blower and inducer motor
• Compatible thermostat: heat/cool with humidity sensing
• Heating capacity: 40,000 - 100,000 BTUh

• Thermostatic Expansion Valve (TXV)
• Horizontal bi-directional airflow design
• Sturdy galvanized steel cabinet
• Non-ozone-depleting R-410A refrigerant
• Capacity: 2 - 5 tons
• Cased horizontal slab coil design for bi-directional airflow
• Corrosion-resistant all-aluminum coil
• Fully insulated cabinet
• Corrosion-free sloped drain pan design helps reduce mold and bacterial buildup