Vendor Name:

Bosch

URI Part Number:

SV0181VTNFRTPDDXAT

Vendor Part Number:

7735072062

Length (In.):

0.00

Width (In.):

0.00

Height (In.):

0.00

Shipping Weight (Lbs.):

201.00

CFM:

600

Compressor:

GK151KAAA3

Cooling Capacity (BTUH):

19200

Cooling Efficiency (EER):

16.15

COP:

3.5

Flow (GPM):

5

Heat Exchangers:

Cupro-Nickel

Heating Capacity (BTUH):

14300

MCA (Amps):

9.3

Motor Type:

PSC

Nominal Tons:

1.5

Orientation:

RT

Refrigerant:

R410A

Voltage:

208-240/1

Prop65:

WARNING: This product can expose you to chemicals including Lead, and Lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

• Constructed using galvanized steel
• Standard hanging bracket kits on HZ units for suspending the unit from field supplied hanger rods
• Up to 16.9 EER (GLHP)
• PSC blower motors for all sizes
• Unit Configuration
  • Left hand or right hand return air
  • Top or end supply air
  • Copper or Cupro-Nickel Coaxial Coil
• Standard 1" Throwaway Filter with 2 side Filter Rack
• 1/2" Dual Density Fiber Insulation
  • Non-combustible, non-hydroscopic and does not support fungal growth
  • Meets NFPA 90A and 90B for fire protection
  • Meets the GREENGUARD Indoor Air Quality Standard
  • All panels are insulated using 1.5 lb./cu.ft. density micromat fiberglass insulation for both thermal insulation and noise reduction
• Compressors
  • Floating compressor base pan for quiet operation
  • Rotary type compressors on sizes 007 through 018
  • Scroll type compressors on sizes 024 through 070
  • Thermal Expansion Valve
    
    
• Tin plated coil
• UPM circuit board with communicating features
• Completely serviceable from front of unit as well as insulated bulkheads allow the unit to be serviced during operation
• DuoGuard™ Evaporator Coil
• Electronic Circuit Board UPM
• 75 VA Transformer
• All water connections are heavy duty bronze FPT fittings securely fastened to the unit corner post

Warranty

• 1 year all parts limited warranty
• 5 year compressor limited warranty

The SV Model is a cost-effective single stage water source heat pump designed for commercial retrofit and new construction applications.

• PSC Motor is standard
• Designed using the optimum combination of compressor, water and copper aluminum-fin evaporator coils with capillary tubes to provide peak performance.
  Capacities rated 77°F cooling, 32°F heating
  Orientation:
  LT: Left return, top supply
  RT: Right return, top supply