1. Home/
  2. Controls and Electrical/
  3. Commercial Building/
  4. Actuator/
  5. Direct Coupled/
  6. Damper Non-Spring Return/
  7. M9116AGA2
  View Compare ( 0 )
Log in for pricing and inventory.

M9116AGA2

M9116AGA2
Log in for pricing and inventory
Direct coupled actuator, non-spring return, 140 Lb./In. torque, 24 Vac, floating
Regional Add to Job List
PDF document icon View Catalog Page
manufacturerSKU :
M9116-AGA-2
Engineered Items :
Yes
SKU :
M9116AGA2
Web Description :
Direct coupled actuator, non-spring return, 140 Lb./In. torque, 24 Vac, floating
Branch Pickup Only :
No
Specials :
No
Sort :
1.0
longDescription :

The M9100 Series is a direct-mount line of motor actuators that operates on 24 Vac or Vdc power and are available for use with floating or proportional controllers.
These bi-directional actuators require no linkages and are easily installed on round damper shafts up to 3/4" diameter or square shafts up to 5/8".
Integral auxiliary switches are available for indicating end-stop position or to perform switching functions at any angle within the selected rotation range. Position feedback is available through switches, a potentiometer, or a 0 (2) to 10 Vdc signal.

  • Supply voltage: 24 Vac
manufacturerName :
Johnson Controls
LogoImage :
L/Logo_JohnsonControls.jpg
Specials Description :
Direct coupled actuator, non-spring return, 140 Lb./In. torque, 24 Vac, floating
Weight :
2.9 lb
Vendor Name:
Johnson Controls
URI Part Number:
M9116AGA2
Vendor Part Number:
M9116-AGA-2
Length (In.):
0.00
Width (In.):
0.00
Height (In.):
0.00
Control Input:
24 Vac, Floating
Shipping Weight (Lbs):
2.90
Prop65:
WARNING: This product contains chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov
Weight (Lbs):
2.90

The M9100 Series is a direct-mount line of motor actuators that operates on 24 Vac or Vdc power and are available for use with floating or proportional controllers.
These bi-directional actuators require no linkages and are easily installed on round damper shafts up to 3/4" diameter or square shafts up to 5/8".
Integral auxiliary switches are available for indicating end-stop position or to perform switching functions at any angle within the selected rotation range. Position feedback is available through switches, a potentiometer, or a 0 (2) to 10 Vdc signal.

  • Supply voltage: 24 Vac
Documents