1. Home/
  2. Controls and Electrical/
  3. Heating/
  4. Gas Pressure Regulator/
  5. RV203/8
  View Compare ( 0 )
Log in for pricing and inventory.

RV203/8

RV203/8
Call To Order
Log in for pricing and inventory
Gas regulator, rubber seat poppet, 3/8" FPT, 150 to 75,000 BTUH main burner, 2.8 to 5.2" WC standard spring, 2-1/8" H x 2-3/8" L
Regional Add to Job List
Vendor Name:
Maxitrol
Web Description :
Gas regulator, rubber seat poppet, 3/8" FPT, 150 to 75,000 BTUH main burner, 2.8 to 5.2" WC standard spring, 2-1/8" H x 2-3/8" L
Branch Pickup Only :
No
manufacturerName :
Maxitrol
Specials :
No
longDescription :

These rubber seat poppet type regulators are designed primarily for main burner and pilot load applications where precise control of tiny flows is an essential operating requirement. Housings are of high strength aluminum die castings. All models have been tested for multi-poise mounting and may be installed in any plane or angle without restriction. Other than normal upright position will result in slight difference of outlet pressure. They may be used with natural, manufactured, mixed, LP, or LP gas-air mixture.

  • Maximum inlet pressure: 1/2 psi
  • RV48 Leak limiting devices 12A04 or 12A06 must be used if not vent piped to code
Sort :
1.0
Specials Description :
Gas regulator, rubber seat poppet, 3/8" FPT, 150 to 75,000 BTUH main burner, 2.8 to 5.2" WC standard spring, 2 1/8" H x 2 3/8" L
Weight :
0.5 lb
Standard Spring (WC) :
2.8 to 5.2
Inlet Pressure (psi) :
1/2 max
SKU :
RV203/8
LogoImage :
L/Logo_maxitrol.jpg
URI Part Number:
RV203/8
Length (In.):
2 3/8
Height (In.):
2 1/8
Female Pipe Thread (In.):
3/8
Range of Regulation Main Burner (BTUH):
150 to 75,000
Range of Regulation Main Burner and Pilot (BTUH):
150 to 50,000
Shipping Weight (Lbs):
0.50
Weight (Lbs):
0.50

These rubber seat poppet type regulators are designed primarily for main burner and pilot load applications where precise control of tiny flows is an essential operating requirement. Housings are of high strength aluminum die castings. All models have been tested for multi-poise mounting and may be installed in any plane or angle without restriction. Other than normal upright position will result in slight difference of outlet pressure. They may be used with natural, manufactured, mixed, LP, or LP gas-air mixture.

  • Maximum inlet pressure: 1/2 psi
  • RV48 Leak limiting devices 12A04 or 12A06 must be used if not vent piped to code