P545NCB25

Use with :

P400BD1C

Differential :

=3.0

Branch Pickup Only :

No

Specials Description :

Lube oil control, electronic, Bitzer, 120 sec time delay, 10.0+-1.5 psid open, includes sensor and wiring harness

LogoImage :

L/Logo_JohnsonControls.jpg

Web Description :

Lube oil control, electronic, Bitzer, 120 sec time delay, 10.0+-1.5 psid open, includes sensor and wiring harness

manufacturerSKU :

P545NCB-25C

SKU :

P545NCB25

longDescription :

The P545 Series electronic lube oil control is designed for use on refrigeration compressors equipped with an oil pump that accepts a single-point differential pressure transducer. The P545 senses net lube oil pressure and de-energizes the compressor if lube oil pressure falls below the manufacturer's recommendation for longer than the time delay. Front-mount LEDs indicate the status of the lubrication system and a user selectable time delay can be set to minimize compressor short cycling.

• P545 controls include pressure sensor and wiring harness
• P400 series sensors will adapt to either 300 or 400 series wire harness; test switch will not function with an older control

Specials :

No

Sort :

3.0

manufacturerName :

Johnson Controls

Application :

Bitzer

Vendor Name:

Johnson Controls

Description :

Control, 90 sec. delay, w/ switch and wire harness

Weight :

1.75 lb

Time Delay :

90 sec

URI Part Number:

P545NCB25

Vendor Part Number:

P545NCB-25C

Length (In.):

7.00

Width (In.):

6.00

Height (In.):

4.00

Pressure Open (psid):

10.0±1.5

Shipping Height (In.):

3.688

Shipping Length (In.):

6.375

Shipping Width (In.):

5

Shipping Weight (Lbs):

1.75

Prop65:

WARNING: This product contains chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov

Weight (Lbs):

1.75

The P545 Series electronic lube oil control is designed for use on refrigeration compressors equipped with an oil pump that accepts a single-point differential pressure transducer. The P545 senses net lube oil pressure and de-energizes the compressor if lube oil pressure falls below the manufacturer's recommendation for longer than the time delay. Front-mount LEDs indicate the status of the lubrication system and a user selectable time delay can be set to minimize compressor short cycling.

• P545 controls include pressure sensor and wiring harness
• P400 series sensors will adapt to either 300 or 400 series wire harness; test switch will not function with an older control