Web Description :

Oil separator, hermetic coalescent, 3/8" ODF, 0.50 ton

Branch Pickup Only :

No

Connection Type :

ODF

Weight :

5.0 lb

Capacity (Tons) :

0.5

Specials Description :

Oil separator, hermetic coalescent, 3/8" ODF, 0.50 ton

Note 1 :

Length does not include mounting stud: 3/4 x 3/8"-16MPT

LogoImage :

L/Logo_temprite.jpg

longDescription :

The Temprite 900/920 Series is the standard in ultra low temperature applications by virtue of its extreme performance range. They employ a matrix type borosilicate coalescent filter to do the work impingement screens formerly did. These exceptionally pure, extremely fine glass fiber matrices excite the oil molecules to collide into one another, thus agglomerating until they are forced to the outer drain layer of the filter. These droplets fall to the bottom of the separator reservoir and the oil is then returned to the compressor. The filter will pick up any and all effluent and dirt circulating in the system down to 0.3 microns. Temprite coalescent separators are not velocity dependant. The most accurate way to size a 900/920 Series oil separator for your application is to determine the actual cubic feet per minute that your compressor will be pumping.

• Oil Connector: 1/4" ODS
• Capacity Rated: R404a, -40°F evaporator
• Maximum working pressure: 650 PSI
• Compatible with HC’s and subcritical CO2

Oil Connector :

1/4" ODF

manufacturerSKU :

090000000

SKU :

900

Specials :

No

manufacturerName :

Temprite

Sort :

1.0

Vendor Name:

Temprite

CFM :

6.33

URI Part Number:

900

Vendor Part Number:

090000000

Length (In.):

10.40

Width (In.):

4.40

Height (In.):

5.10

Connection Size (In.):

3/8

Diameter (In.):

4.00

Overall Length (In.):

8.25

Shipping Weight (Lbs):

5.00

Weight (Lbs):

5.00

The Temprite 900/920 Series is the standard in ultra low temperature applications by virtue of its extreme performance range. They employ a matrix type borosilicate coalescent filter to do the work impingement screens formerly did. These exceptionally pure, extremely fine glass fiber matrices excite the oil molecules to collide into one another, thus agglomerating until they are forced to the outer drain layer of the filter. These droplets fall to the bottom of the separator reservoir and the oil is then returned to the compressor. The filter will pick up any and all effluent and dirt circulating in the system down to 0.3 microns. Temprite coalescent separators are not velocity dependant. The most accurate way to size a 900/920 Series oil separator for your application is to determine the actual cubic feet per minute that your compressor will be pumping.

• Oil Connector: 1/4" ODS
• Capacity Rated: R404a, -40°F evaporator
• Maximum working pressure: 650 PSI
• Compatible with HC’s and subcritical CO2