T904

longDescription :

The Temprite 900/920 Series is the standard in ultra low temperature applications by virtue of its extreme performance range. They employ a matrix type borosilicate coalescent filter to do the work impingement screens formerly did. These exceptionally pure, extremely fine glass fiber matrices excite the oil molecules to collide into one another, thus agglomerating until they are forced to the outer drain layer of the filter. These droplets fall to the bottom of the separator reservoir and the oil is then returned to the compressor. The filter will pick up any and all effluent and dirt circulating in the system down to 0.3 microns. Temprite coalescent separators are not velocity dependant. The most accurate way to size a 900/920 Series oil separator for your application is to determine the actual cubic feet per minute that your compressor will be pumping.

• Oil Connector: 1/4" ODS
• Capacity Rated: R404a, -40°F evaporator
• Maximum working pressure: 650 PSI
• Compatible with HC’s and subcritical CO2

Oil Connector :

1/4" ODF

Weight :

9.0 lb

Branch Pickup Only :

No

Connection Type :

ODF

Specials :

No

Specials Description :

Oil separator, hermetic coalescent, 1 1/8" ODF, 3.34 tons

Capacity (Tons) :

3.5

Sort :

1.0

manufacturerName :

Temprite

Web Description :

Oil separator, hermetic coalescent, 1-1/8" ODF, 3.5 tons

Note 1 :

Length includes mounting leg

SKU :

T904

Vendor Name:

Temprite

manufacturerSKU :

090400000

LogoImage :

L/Logo_temprite.jpg

CFM :

42.4

URI Part Number:

T904

Vendor Part Number:

090400000

Connection Size (In.):

1 1/8

Diameter (In.):

4

Overall Length (In.):

18 3/8

Shipping Weight (Lbs):

9.00

Weight (Lbs):

9.00

The Temprite 900/920 Series is the standard in ultra low temperature applications by virtue of its extreme performance range. They employ a matrix type borosilicate coalescent filter to do the work impingement screens formerly did. These exceptionally pure, extremely fine glass fiber matrices excite the oil molecules to collide into one another, thus agglomerating until they are forced to the outer drain layer of the filter. These droplets fall to the bottom of the separator reservoir and the oil is then returned to the compressor. The filter will pick up any and all effluent and dirt circulating in the system down to 0.3 microns. Temprite coalescent separators are not velocity dependant. The most accurate way to size a 900/920 Series oil separator for your application is to determine the actual cubic feet per minute that your compressor will be pumping.

• Oil Connector: 1/4" ODS
• Capacity Rated: R404a, -40°F evaporator
• Maximum working pressure: 650 PSI
• Compatible with HC’s and subcritical CO2