A9E-7/8

Web Description :

Pressure regulator, Flo-con, outlet pressure, hot gas, 7/8" port, 7/8" hot gas, 10" to 120 psig

Pressure Range (psig) :

10" to 120

Engineered Items :

Yes

longDescription :

The A9E is an "externally equalized" outlet pressure regulator and is usually applied as a hot gas bypass regulator. For those applications where the discharge gas is introduced into the inlet of the evaporator, an A9E is typically used with a small pilot line connected from the compressor suction to the external f itting on the regulator. Installed in this manner the valve senses and responds to compressor suction pressure while piped to feed discharge gas to the inlet of the evaporator.

Features and Benefits:
• Controls outlet pressure at sensing point
• Pilot operated for close regulation
• Few sizes cover entire capacity range
• • Tight seating - simple adjustment
• Sweat end design solders into line without disassembly

Branch Pickup Only :

No

manufacturerName :

Parker

SKU :

A9E-7/8

Weight :

0.5 lb

LogoImage :

L/Logo_PARKER.jpg

Specials Description :

Pressure regulator, Flo-con, outlet pressure, hot gas, 7/8" port, 7/8" hot gas, 10" to 120 psig

Specials :

No

Vendor Name:

Parker

Condenser Bypass Capacity :

95°condensing, 0°F evaporator, 180°F discharge, 10 psi ?P, R404A

Hot Gas Capacity Description :

110°F condensing, 180°F discharge

Sort :

2.0

manufacturerSKU :

100932

Connection Type :

ODS

URI Part Number:

A9E-7/8

Vendor Part Number:

100932

Length (In.):

10.20

Width (In.):

6.80

Height (In.):

4.40

Condenser Bypass Capacity (Tons):

15.5

Hot Gas Bypass Capacity (Tons):

16.4

Hot Gas Size (In.):

7/8

Shipping Weight (Lbs):

0.50

Prop65:

WARNING: This product can expose you to chemicals including Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Weight (Lbs):

0.50

The A9E is an "externally equalized" outlet pressure regulator and is usually applied as a hot gas bypass regulator. For those applications where the discharge gas is introduced into the inlet of the evaporator, an A9E is typically used with a small pilot line connected from the compressor suction to the external f itting on the regulator. Installed in this manner the valve senses and responds to compressor suction pressure while piped to feed discharge gas to the inlet of the evaporator.

Features and Benefits:
• Controls outlet pressure at sensing point
• Pilot operated for close regulation
• Few sizes cover entire capacity range
• • Tight seating - simple adjustment
• Sweat end design solders into line without disassembly