Web Description :

Solenoid valve, industrial, teflon diaphragm, brass seat, 3/4" port, 3/4" FPT

manufacturerSKU :

3929-00

Branch Pickup Only :

No

Vendor Name:

Sporlan

manufacturerName :

Sporlan

Connection Type :

FPT x FPT

Use Coil Model :

MKC1

SKU :

R246P1

Specials Description :

Solenoid valve, industrial, teflon diaphragm, brass seat, 3/4" port, 3/4" FPT

Sort :

4.0

longDescription :

Ideal for water, most refrigerant oils, air lines to chucking devices, steam lines, etc. These valves may be mounted horizontally, on their side, or on a vertical line. These valves are tight sealing in applications of normal differential pressure. Use teflon diaphragm type valves for high temperature and steam applications over 5 psig but do not exceed 10 psig. For applications where differential pressures in the closed position are below 5 psi, it is recommended that a Buna-N diaphragm be used in the place of the standard teflon diaphragm. In certain areas of the country, particularly hard water localities, the integral brass seats in the solenoid valves may deteriorate very rapidly. This problem is solved by using a stainless steel seat insert in place of the usual brass seat.

• For air, water, steam, light oil
• Use MKC1 coil
• Connection: FPT x FPT

Specials :

No

Weight :

1.48 lb

LogoImage :

L/Logo_Sporlan.jpg

URI Part Number:

R246P1

Vendor Part Number:

3929-00

Length (In.):

4.70

Width (In.):

4.10

Height (In.):

2.20

Connection Size (In.):

3/4

Diaphragm:

Teflon

Seat Material:

Brass

Shipping Weight (Lbs):

1.48

Prop65:

WARNING: This product can expose you to chemicals including Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Weight (Lbs):

1.50

Ideal for water, most refrigerant oils, air lines to chucking devices, steam lines, etc. These valves may be mounted horizontally, on their side, or on a vertical line. These valves are tight sealing in applications of normal differential pressure. Use teflon diaphragm type valves for high temperature and steam applications over 5 psig but do not exceed 10 psig. For applications where differential pressures in the closed position are below 5 psi, it is recommended that a Buna-N diaphragm be used in the place of the standard teflon diaphragm. In certain areas of the country, particularly hard water localities, the integral brass seats in the solenoid valves may deteriorate very rapidly. This problem is solved by using a stainless steel seat insert in place of the usual brass seat.

• For air, water, steam, light oil
• Use MKC1 coil
• Connection: FPT x FPT