Catalog pricing shown. Please Sign In to see your pricing.

Arcoaire AC Single Phase Split System Deluxe Multi Stg 3 Ton 42k BTU 80Pct ULN Gas Furnace 080 MBH 17.5 SEER2

Arcoaire AC Single Phase Split System Deluxe Multi Stg 3 Ton 42k BTU 80Pct ULN Gas Furnace 080 MBH 17.5 SEER2
Kit Includes BIP Gas Cock, PVC Ptrap Kit, Electrical Box, Switch, Receptical & Duplex Cover, whip 6' 3/4" 8GA, Disconnect, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, No Vent Caps, 2" Plastic Pad, Furnace Leveler, 2H/2C Thermostat

This retail set contains

Vendor Name:
Arcoaire
URI Part Number:
Arcoaire AC Single Phase Split System Deluxe Multi Stg 3 Ton 42k BTU 80Pct ULN Gas Furnace 080 MBH 17.5 SEER2
Shipping Weight (Lbs.):
200
Energy Star:
Energy Star 6.1 Compliant: 15.2 SEER2, 12.0 EER2
Heating Input (BTUH):
080 MBH Heat
Includes:
H4A7T36AKAWA, F80CSU0802120A, EVD4X42M24A, ACGKIT9
Nominal Capacity (BTUH):
36000
Cooling Efficiency (EER2):
13
Cooling Efficiency (SEER2):
17.5
Heating Efficiency HSPF2:
A/C is Energy Star 6.1 compliant
System Indoor Type:
ULN Gas Furnace
System Outdoor Type:
Multi Stage
System Coil Configuration:
Vertical Power "V
Furnace Efficiency:
80
System Nominal Tons:
3
AHRI System Number:
210697221
A/C, Single Phase, Split ULN Gas Furnace Multi Stage, Vertical Power "V" H4A7T/F80CSU/EVD4X

Air Conditioner Condenser
  • 2 Stage Copeland Scroll Ultratech Compressor
  • Welded Aluminum Tube / Aluminum Fin Coil
  • Improved Efficiency w/ Multi Directional Internal Enhancements
  • Less Sensitivity to Pressure Drop
  • Heat Shrink Wrap Protects Copper / Aluminum Joints
  • AL/AL w/ Zinc Cladding Provides Enhanced Corrosion Protection
  • Approximately 50% Lighter than Copper Coils
  • Filter Drier Supplied for Field Installation
  • Self Configuring Operation & Text Based Diagnostics w/ Ion Control
  • Compressor Sound Blanket & Isolation Grommets Factory Installed
  • Extended Service Valve to Accommodate Press Fittings
  • High & Low Pressure Switches
  • Outdoor Temp Sensor Factory Installed
  • Factory Charged w/ R410A Refrigerant
  • Long Line Set Capability (refer to spec sheet for details)
  • Low Ambient Cooling Capable w/ Optional Kit
  • Galvanized Steel Cabinet w/ High Gloss, Baked on Powder Coat Paint
  • Corner Posts for Added Cabinet Strength
  • Coated Hail Guard Coil Protection
  • Post Painted (black) Coil
  • Coated Cabinet Screws
  • Internal Pressure Relief Valve & Thermal Overload

Ultra Low NOx Gas Furnace

  • High efficiency variable-speed, constant airflow (VCA) ECM blower motor
  • Variable-speed induced draft combustion motor
  • Single-stage gas valve
  • Stainless steel primary heat exchanger
  • Reliable direct gas ignition with silicon nitride ignitor
  • High temperature limit control designed to prevent overheating
  • Solid, pre-painted steel cabinet with tight fit door latch system
  • Sound-reducing features: fully insulated cabinet with soft mounted blower and inducer motor
  • 4 Way Multipoise
  • Natural Gas only, not convertible to Liquid Propane
  • Compatible thermostat: Ion System Control for full function and efficiency capability, Wi-Fi remote access convenience and intelligent diagnostics±
  • Heating capacity: 40,000 - 100,000 BTUh
Evaporator Coil
  • Corrosion Resistant Aluminum
  • Low Pressure Drop
  • TXV metering device factory installed
  • Compact design, shorter than A-coils
  • Hemmed flanges for safer handling
  • Cabinets meet or exceed 2% air leakage codes
  • UV knockout
  • No delta plate allows easy cleaning
  • 30-40% Lighter than “A” Coils
  • 80% Fewer Factory Braze Joints vs. “N” Coils
  • V Design Reduces Cabinet Sweating
  • Helium leak tested @ the factory