Catalog pricing shown. Please Sign In to see your pricing.

Arcoaire AC Single Phase Split System Deluxe Multi Stg 3 Ton 42k BTU Coil 96Pct Gas Furnace 080 MBH 16.5 SEER2 V2

Arcoaire AC Single Phase Split System Deluxe Multi Stg 3 Ton 42k BTU Coil 96Pct Gas Furnace 080 MBH 16.5 SEER2 V2
Kit Includes BIP Gas Cock, PVC Ptrap Kit, Electrical Box, Switch, Receptical & Duplex Cover, whip 6' 3/4" 8GA, Disconnect, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, No Vent Caps, 2" Plastic Pad, Furnace Leveler, 2H/2C Thermostat

This retail set contains

Vendor Name:
Arcoaire
URI Part Number:
Arcoaire AC Single Phase Split System Deluxe Multi Stg 3 Ton 42k BTU Coil 96Pct Gas Furnace 080 MBH 16.5 SEER2 V2
Shipping Weight (Lbs.):
200
Energy Star:
Energy Star 6.1 Compliant: 15.2 SEER2, 12.0 EER2
Heating Input (BTUH):
080 MBH Heat
Includes:
H4A7T36AKAWA, N96VSN0801716A, EVD4X42M21A, ACGKIT9
Nominal Capacity (BTUH):
36000
Cooling Efficiency (EER2):
12
Cooling Efficiency (SEER2):
16.5
Heating Efficiency HSPF2:
A/C is Energy Star 6.1 compliant
System Indoor Type:
Gas Furnace
System Outdoor Type:
Multi Stage
System Coil Configuration:
Vertical Power "V
Furnace Efficiency:
96
System Nominal Tons:
3
AHRI System Number:
210697256
A/C, Single Phase, Split Gas Furnace Multi Stage, Vertical Power "V" H4A7T/N96VSN/EVD4X

Air Conditioner Condenser
  • 2 Stage Copeland Scroll Ultratech Compressor
  • Welded Aluminum Tube / Aluminum Fin Coil
  • Improved Efficiency w/ Multi Directional Internal Enhancements
  • Less Sensitivity to Pressure Drop
  • Heat Shrink Wrap Protects Copper / Aluminum Joints
  • AL/AL w/ Zinc Cladding Provides Enhanced Corrosion Protection
  • Approximately 50% Lighter than Copper Coils
  • Filter Drier Supplied for Field Installation
  • Self Configuring Operation & Text Based Diagnostics w/ Ion Control
  • Compressor Sound Blanket & Isolation Grommets Factory Installed
  • Extended Service Valve to Accommodate Press Fittings
  • High & Low Pressure Switches
  • Outdoor Temp Sensor Factory Installed
  • Factory Charged w/ R410A Refrigerant
  • Long Line Set Capability (refer to spec sheet for details)
  • Low Ambient Cooling Capable w/ Optional Kit
  • Galvanized Steel Cabinet w/ High Gloss, Baked on Powder Coat Paint
  • Corner Posts for Added Cabinet Strength
  • Coated Hail Guard Coil Protection
  • Post Painted (black) Coil
  • Coated Cabinet Screws
  • Internal Pressure Relief Valve & Thermal Overload

Gas Furnace

  • Fully insulated steel cabinet
  • Dehumidification feature in cooling
  • Certified to leak 2% or less of nominal air conditioning CFM delivered (when pressured to 1 inch water column with all present air inlets, air outlets, and condensate drain port(s) sealed
  • VCT Constant Torque Variable Speed Motor
  • Supports Single & Two Stage A/C
  • Aluminized steel RPJ primary heat exchanger
  • Stainless Steel Secondary Heat Exchanger
  • Direct ignition with Silicon Nitride ignitor
  • Direct vent (2-pipe), single-pipe venting, or ventilated combustion air
  • 35” (889mm) high, for ease of installation
  • Four position - upflow/downflow/horizontal (left/right) installation
  • At least twelve different venting configurations
  • Through the casing flue pipe for counterflow or horizontal applications with accessory (order separately)
  • Self diagnostics with super bright LED
  • Concentric vent available
  • Twining capable (select sizes) w/ kit
Evaporator Coil
  • Corrosion Resistant Aluminum
  • Low Pressure Drop
  • TXV metering device factory installed
  • Compact design, shorter than A-coils
  • Hemmed flanges for safer handling
  • Cabinets meet or exceed 2% air leakage codes
  • UV knockout
  • No delta plate allows easy cleaning
  • 30-40% Lighter than “A” Coils
  • 80% Fewer Factory Braze Joints vs. “N” Coils
  • V Design Reduces Cabinet Sweating
  • Helium leak tested @ the factory