Catalog pricing shown. Please Sign In to see your pricing.

Arcoaire HP Single Phase Split System Deluxe Single Stg 3 Ton 36k BTU AHU 15.2 SEER2

Arcoaire HP Single Phase Split System Deluxe Single Stg 3 Ton 36k BTU AHU 15.2 SEER2
Kit Includes Whip 6' 1/2" 10GA, No Vent Caps, 2" Plastic Pad, 2H/2C Thermostat, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, 6" Heat Pump Riser, Furnace Leveler, PVC Ptrap Kit, Disconnect

This retail set contains

Vendor Name:
Arcoaire
URI Part Number:
Arcoaire HP Single Phase Split System Deluxe Single Stg 3 Ton 36k BTU AHU 15.2 SEER2
Shipping Weight (Lbs.):
200
Energy Star:
Energy Star 6.1 Compliant: 15.2 SEER2, 11.7 EER2, 7.8 HSPF2
Includes:
H4H5S36AKAAA, FMA4X3600AL, HPKIT5
Nominal Capacity (BTUH):
36000
Cooling Efficiency (EER2):
12.5
Cooling Efficiency (SEER2):
15.2
Heating Efficiency HSPF2:
7.8 HSPF2
System Indoor Type:
AHU
System Outdoor Type:
Single Stage
System Coil Configuration:
Front Return
System AHU Type:
Specialty AHU (Uncased, Apartment)
System Nominal Tons:
3.0 Ton
AHRI System Number:
209692731
Heat Pump, Single Phase, Split AHU Single Stage, Front Return H4H5S/FMA4

Heat Pump
  • Scroll Compressors on all models
  • Welded Aluminum Tube / Aluminum Fin Coil
  • Improved Efficiency w/ Multi Directional Internal Enhancements
  • Less Sensitivity to Pressure Drop
  • Heat Shrink Wrap Protects Copper / Aluminum Joints
  • AL/AL w/ Zinc Cladding Provides Enhanced Corrosion Protection
  • Approximately 50% Lighter than Copper Coils
  • Bi Flow Filter Drier Supplied for Field Installation
  • Suction Line Accumulator Standard
  • Self Configuring Operation & Text Based Diagnostics w/ Ion Control
  • Compressor Sound Blanket & Isolation Grommets Factory Installed
  • Extended Service Valve to Accommodate Press Fittings
  • High & Low Pressure Switches
  • Outdoor Temp Sensor Factory Installed
  • Factory Charged w/ R410A Refrigerant
  • Long Line Set Capability (refer to spec sheet for details)
  • Low Ambient Cooling Capable w/ Optional Kit
  • Galvanized Steel Cabinet w/ High Gloss, Baked on Powder Coat Paint
  • Corner Posts for Added Cabinet Strength
  • Coated Hail Guard Coil Protection
  • Post Painted (black) Coil
  • Coated Cabinet Screws
  • Reliable Time / Temperature Defrost Control
  • Internal Pressure Relief Valve & Internal Thermal Overload

Front Return Fan Coils

  • Factory installed TXV (4X) - Piston (4P)
  • EC motor (4X) - PSC Motor (4P)
  • Motor suspended on rubber grommets for quieter operation
  • Standard return air grille panel and is convertible to bottom return
  • Replaceable air filter factory supplied with all models
  • Fully insulated for conditioned space (not to be installed in unconditioned spaces)
  • Upflow application only
  • 208/230-1-60 supply voltage
  • Fresh air intake holes (capped from factory)
  • Units fits between standard stud spacing
  • All service access is located in the front
  • Primary and secondary drain connections exit from the bottom
  • No return-air ductwork required in specific applications