Catalog pricing shown. Please log in to see your pricing.

PACT24S3-T3-Z

PACT24S3-T3-Z
Call To Order
Packaged air cooled chiller, scroll compressor, single circuit, with 30 gal tank, 2-1/2 HP, 208-230/3/60
Vendor Name:
Drake
URI Part Number:
PACT24S3-T3-Z
Length (In.):
36
Width (In.):
34
Height (In.):
60
Shipping Weight (Lbs.):
650
BTUH at 95°F Amb. 45°F Lwt:
22,000
Compressor Horsepower:
2.5
Compressor Quantity:
1
Evap Pump FLA:
5.1
Fan Motor FLA:
3.3
Fan Motor Qty:
1
LRA:
63.0
Maximum Fuse:
25
MCA (Amps):
20
Nominal Capacity (BTUH):
22,000
Process Fluid Connection (In.):
1 FPT
Rated Load Amps:
8.2
Tank Capacity (Gal.):
30.0
Voltage:
208-230/3/60
Weight (Lbs.):
650.0

Standard Features

  • ETL listed
  • Stainless steel brazed plate evaporator with 1/2" insulation and secured in a steel bracket
  • Advanced Microprocessor: BMS, BAS communications, remote access, monitoring services
  • Scroll compressor (digital scroll compressor for -ZD models) with crankcase heater
  • Suction accumulator
  • Water flow switch
  • 24V control transformer
  • Direct drive condenser fan motor
  • Rust resistant, high CFM, aluminum condenser fan blade
  • Condenser(s): copper tube/aluminum fin
  • Compressor motor contactor
  • Condenser motor and control circuit fusing
  • Painted galvanized sheet metal cabinet
  • 1/2" insulation on all water and refrigerant lines
  • Liquid line drier, sightglass, solenoid, TEV
  • Full refrigerant charge from factory
  • Phase monitor
  • Hot gas by-pass capacity control on standard scroll models (not -ZD or tandem models)
  • "Hard start kit" (single phase units only)

Available Options

  • Remote touchscreen panel
  • 4 year extended compressor warranty
  • Casters (factory mounted)
  • 115 volt (rain tight) sevice outlet
  • Fused disconnect
  • Compressor fusing
  • EC Fan motor(s) (+10°)
  • Flooded condenser with receiver/head pressure control (-20°F)
  • Heated flooded condenser with receiver/head pressure control (-40°F)
  • Factory installed evaporator heat tape freeze protection thermostatically controlled
  • Fused stainless steel process pump with unions and ball valves
  • Water pressure gauge set
  • Dual system pump with manual changeover or auto changeover
  • Low flow bypass valve
  • Electroplated, copper or heresite finned condenser coil (coastal protection)
  • Shell and tube evaporator barrel
  • Water flow meter
  • Auto city water make up solenoid
  • Auto city water changeover panel with 5 micron filter option
  • Special piping for de-ionized and reverse osmosis water systems
  • OSHPD special seismic certification (up to 240D model)


Standard Features for Tank Models

  • Stainless steel recirculation tank with 1/2" insulation
  • Fused stainless steel re-circulation pump for tank operation with unions, ball valves and cleanable strainer
  • Tank pressure relief valve, vent, and drain connections
  • Tank sight glass

Options for Tank Models

  • Tank low liquid level indicator with dry contacts
  • Process pump VFD
  • Tank heater
Installation Instructions

Specification Sheet