Log in for pricing and inventory.

PAC240D3-T4-Z

PAC240D3-T4-Z
Contact local branch to order
Packaged air cooled chiller, scroll compressor, dual circuit, 24 HP, 460/3/60
Rated Load Amps :
25.7
Sort :
17.0
Engineered Items :
Yes
LTL Only :
Yes
Branch Pickup Only :
No
Vendor Name:
Drake
manufacturerName :
Drake
Fan Motor FLA :
1.6
Specials Description :
Packaged air cooled chiller, scroll compressor, dual circuit, 24 HP, 460/3/60
Maximum Fuse :
80
Fan Motor Qty :
4
SKU :
PAC240D3-T4-Z
Web Search :
Volt
Web Description :
Packaged air cooled chiller, scroll compressor, dual circuit, 24 HP, 460/3/60
Weight :
1,750.0 lb
Compressor Quantity :
2
LRA :
150.0
Specials :
No
longDescription :

Standard Features

  • ETL listed
  • Stainless steel brazed plate evaporator with 1/2" insulation and secured in a steel bracket
  • Advanced Microprocessor: BMS, BAS communications, remote access, monitoring services
  • Scroll compressor (digital scroll compressor for -ZD models) with crankcase heater
  • Suction accumulator
  • Water flow switch
  • 24V control transformer
  • Direct drive condenser fan motor
  • Rust resistant, high CFM, aluminum condenser fan blade
  • Condenser(s): copper tube/aluminum fin
  • Compressor motor contactor
  • Condenser motor and control circuit fusing
  • Painted galvanized sheet metal cabinet
  • 1/2" insulation on all water and refrigerant lines
  • Liquid line drier, sightglass, solenoid, TEV
  • Full refrigerant charge from factory
  • Phase monitor
  • Hot gas by-pass capacity control on standard scroll models (not -ZD or tandem models)
  • "Hard start kit" (single phase units only)

Available Options

  • Remote touchscreen panel
  • 4 year extended compressor warranty
  • Casters (factory mounted)
  • 115 volt (rain tight) sevice outlet
  • Fused disconnect
  • Compressor fusing
  • EC Fan motor(s) (+10°)
  • Flooded condenser with receiver/head pressure control (-20°F)
  • Heated flooded condenser with receiver/head pressure control (-40°F)
  • Factory installed evaporator heat tape freeze protection thermostatically controlled
  • Fused stainless steel process pump with unions and ball valves
  • Water pressure gauge set
  • Dual system pump with manual changeover or auto changeover
  • Low flow bypass valve
  • Electroplated, copper or heresite finned condenser coil (coastal protection)
  • Shell and tube evaporator barrel
  • Water flow meter
  • Auto city water make up solenoid
  • Auto city water changeover panel with 5 micron filter option
  • Special piping for de-ionized and reverse osmosis water systems
  • OSHPD special seismic certification (up to 240D model)
Compressor Horsepower :
12
Nominal Capacity (BTUH) :
264000
LogoImage :
L/Logo_DRAKE.jpg
Process Fluid Connection (In.) :
1 1/2 FPT
Voltage :
460/3
URI Part Number:
PAC240D3-T4-Z
Length (In.):
66
Width (In.):
75
Height (In.):
49
MCA (Amps):
70
Shipping Weight (Lbs):
1750.00
Weight (Lbs):
1750.00

Standard Features

  • ETL listed
  • Stainless steel brazed plate evaporator with 1/2" insulation and secured in a steel bracket
  • Advanced Microprocessor: BMS, BAS communications, remote access, monitoring services
  • Scroll compressor (digital scroll compressor for -ZD models) with crankcase heater
  • Suction accumulator
  • Water flow switch
  • 24V control transformer
  • Direct drive condenser fan motor
  • Rust resistant, high CFM, aluminum condenser fan blade
  • Condenser(s): copper tube/aluminum fin
  • Compressor motor contactor
  • Condenser motor and control circuit fusing
  • Painted galvanized sheet metal cabinet
  • 1/2" insulation on all water and refrigerant lines
  • Liquid line drier, sightglass, solenoid, TEV
  • Full refrigerant charge from factory
  • Phase monitor
  • Hot gas by-pass capacity control on standard scroll models (not -ZD or tandem models)
  • "Hard start kit" (single phase units only)

Available Options

  • Remote touchscreen panel
  • 4 year extended compressor warranty
  • Casters (factory mounted)
  • 115 volt (rain tight) sevice outlet
  • Fused disconnect
  • Compressor fusing
  • EC Fan motor(s) (+10°)
  • Flooded condenser with receiver/head pressure control (-20°F)
  • Heated flooded condenser with receiver/head pressure control (-40°F)
  • Factory installed evaporator heat tape freeze protection thermostatically controlled
  • Fused stainless steel process pump with unions and ball valves
  • Water pressure gauge set
  • Dual system pump with manual changeover or auto changeover
  • Low flow bypass valve
  • Electroplated, copper or heresite finned condenser coil (coastal protection)
  • Shell and tube evaporator barrel
  • Water flow meter
  • Auto city water make up solenoid
  • Auto city water changeover panel with 5 micron filter option
  • Special piping for de-ionized and reverse osmosis water systems
  • OSHPD special seismic certification (up to 240D model)
Documents