Catalog pricing shown. Please log in to see your pricing.

PAC250S3-T4-Z

PAC250S3-T4-Z
Call To Order
Packaged air cooled chiller, scroll compressor, single circuit, 20 HP, 460/3/60
URI Part Number:
PAC250S3-T4-Z
Vendor Name:
Drake
Length (In.):
183
Width (In.):
44
BTUH at 95°F Amb. 45°F Lwt:
210,000
Compressor Horsepower:
20
Compressor Quantity:
1
Fan Motor FLA:
3.6
Fan Motor Qty:
3
Height (In.):
54
LRA:
225.0
Maximum Fuse:
80
MCA (Amps):
60
Nominal Capacity (BTUH):
210,000
Process Fluid Connection (In.):
2 1/2 MPT
Rated Load Amps:
37.9
Sort:
31.0
Voltage:
460/3/60
Weight (Lbs.):
1,700.0
Shipping Weight (Lbs.):
1700

Standard Features

  • ETL listed
  • Stainless steel brazed plate evaporator with 1/2" insulation and secured in a steel bracket
  • Advanced Microprocessor: BMS, BAS communications, remote access, monitoring services
  • Scroll compressor (digital scroll compressor for -ZD models) with crankcase heater
  • Suction accumulator
  • Water flow switch
  • 24V control transformer
  • Direct drive condenser fan motor
  • Rust resistant, high CFM, aluminum condenser fan blade
  • Condenser(s): copper tube/aluminum fin
  • Compressor motor contactor
  • Condenser motor and control circuit fusing
  • Painted galvanized sheet metal cabinet
  • 1/2" insulation on all water and refrigerant lines
  • Liquid line drier, sightglass, solenoid, TEV
  • Full refrigerant charge from factory
  • Phase monitor
  • Hot gas by-pass capacity control on standard scroll models (not -ZD or tandem models)
  • "Hard start kit" (single phase units only)

Available Options

  • Remote panel
  • 4 year extended compressor warranty
  • Casters (factory mounted)
  • 115 volt (rain tight) sevice outlet
  • Fused disconnect
  • Compressor fusing
  • EC Fan motor(s) (+10°)
  • Flooded condenser with receiver/head pressure control (-20°F)
  • Heated flooded condenser with receiver/head pressure control (-40°F)
  • Factory installed evaporator heat tape freeze protection thermostatically controlled
  • Fused stainless steel process pump with unions and ball valves
  • Water pressure gauge set
  • Dual system pump with manual changeover or auto changeover
  • Low flow bypass valve
  • Electroplated, copper or heresite finned condenser coil (coastal protection)
  • Shell and tube evaporator barrel
  • Water flow meter
  • Auto city water make up solenoid
  • Auto city water changeover panel with 5 micron filter option
  • Special piping for de-ionized and reverse osmosis water systems
  • OSHPD special seismic certification (up to 240D model)