ES100D3-S2-Z

LRA :

129.0

Engineered Items :

Yes

LTL Only :

Yes

manufacturerName :

Drake

Branch Pickup Only :

No

Vendor Name:

Drake

Voltage :

208-240/1

Process Fluid Connection (In.) :

1 1/4 FPT

Compressor Horsepower :

5

Web Search :

Volt

Web Description :

Split system air cooled chiller, scroll compressor, evaporator, dual circuit, 10+ HP, use CS100D condenser, 208-230/1/60

SKU :

ES100D3-S2-Z

MOP :

80

Rated Load Amps :

27.9

Fan Motor FLA :

3.3

Specials Description :

Split system air cooled chiller, scroll compressor, evaporator, dual circuit, 10+ HP, use CS100D condenser, 208-230/1/60

Nominal Capacity (BTUH) :

111600

Compressor Quantity :

2

Specials :

No

longDescription :

Standard Features

• ETL listed
• Remote condenser section
• Advanced Microprocessor: BMS, BAS communications, remote access, monitoring services
• Stainless steel brazed plate evaporator with 1/2" insulation and secured in a steel bracket
• Scroll compressor (digital scroll for -ZD models) with crankcase heater
• Suction accumulator
• Water flow switch
• Hot gas by-pass capacity control on standard scroll models (not -ZD or tandem models)
• 24V control transformer
• Direct drive condenser fan motor
• Rust resistant, high CFM, aluminum condenser fan blade
• Condenser(s): copper tube/aluminum fin
• Compressor motor contactor
• Condenser motor and control circuit fusing
• Painted galvanized sheet metal cabinet
• 1/2" insulation on all water and refrigerant lines
• Liquid line drier, sightglass, solenoid, TEV
• Full refrigerant charge from factory (not including field piping)

Available Options

• Remote touchscreen panel
• 4 year extended compressor warranty
• Casters (factory mounted)
• 115 volt (rain tight) sevice outlet
• Fused disconnect
• Compressor fusing
• EC fan motor (s) (+10°F)
• Flooded condenser with receiver/head pressure control (-20°F)
• Heated flooded condenser with receiver/head pressure control (-40°F)
• Factory installed evaporator heat tape freeze protection thermostatically controlled
• Water pressure gauge set
• Fused stainless steel with unions and ball valves process pump
• Dual system pump with manual changeover or autochangeover
• Low flow bypass valve
• Electroplated, copper or heresite finned condenser coil (coastal protection)
• Shell and tube evaporator barrel
• Water flow meter
• Auto city water make up solenoid
• Auto city water changeover panel with 5 micron filter option
• Special piping for de-ionized and reverse osmosis water systems

Fan Motor Qty :

2

Weight :

1,100.0 lb

Sort :

7.0

LogoImage :

L/Logo_DRAKE.jpg

Condenser :

CS100D

URI Part Number:

ES100D3-S2-Z

Length (In.):

65

Width (In.):

30

Height (In.):

39

MCA (Amps):

70

Shipping Weight (Lbs):

1100.00

Weight (Lbs):

1100.00

Standard Features

• ETL listed
• Remote condenser section
• Advanced Microprocessor: BMS, BAS communications, remote access, monitoring services
• Stainless steel brazed plate evaporator with 1/2" insulation and secured in a steel bracket
• Scroll compressor (digital scroll for -ZD models) with crankcase heater
• Suction accumulator
• Water flow switch
• Hot gas by-pass capacity control on standard scroll models (not -ZD or tandem models)
• 24V control transformer
• Direct drive condenser fan motor
• Rust resistant, high CFM, aluminum condenser fan blade
• Condenser(s): copper tube/aluminum fin
• Compressor motor contactor
• Condenser motor and control circuit fusing
• Painted galvanized sheet metal cabinet
• 1/2" insulation on all water and refrigerant lines
• Liquid line drier, sightglass, solenoid, TEV
• Full refrigerant charge from factory (not including field piping)

Available Options

• Remote touchscreen panel
• 4 year extended compressor warranty
• Casters (factory mounted)
• 115 volt (rain tight) sevice outlet
• Fused disconnect
• Compressor fusing
• EC fan motor (s) (+10°F)
• Flooded condenser with receiver/head pressure control (-20°F)
• Heated flooded condenser with receiver/head pressure control (-40°F)
• Factory installed evaporator heat tape freeze protection thermostatically controlled
• Water pressure gauge set
• Fused stainless steel with unions and ball valves process pump
• Dual system pump with manual changeover or autochangeover
• Low flow bypass valve
• Electroplated, copper or heresite finned condenser coil (coastal protection)
• Shell and tube evaporator barrel
• Water flow meter
• Auto city water make up solenoid
• Auto city water changeover panel with 5 micron filter option
• Special piping for de-ionized and reverse osmosis water systems