Catalog pricing shown. Please log in to see your pricing.

BHT010X6B

BHT010X6B
Condensing unit, air cooled, hermetic compressor, outdoor, medium/low temp, R404A, R507, 1 HP, 208-230/1/60, w/ receiver
Please note an alternative model exists for this Part Number. Please see the Supersedes tab.
Vendor Name:
Bohn
URI Part Number:
BHT010X6B
Vendor Part Number:
BHT010X6B
Length (In.):
28 1/4
Width (In.):
23 3/4
Height (In.):
17 1/4
Shipping Weight (Lbs.):
138
Application:
Extended Temp
Compressor:
RS70C1EPFV
Connection Liquid (In.):
3/8
Connection Suction (In.):
5/8
Connection Type:
ODS
Horsepower:
1
MCA (Amps):
15
Oil:
Polyol Ester
Receiver Capacity 90 % Full (Lbs.):
5.5
Receiver Included:
Yes
Refrigerant:
R404A, R507A, R407A, R407C, R448A, R449A
Voltage:
208-230/1/60
Prop65:
WARNING: Cancer and Reproductive Harm- For more information go to www.P65Warnings.ca.gov

Units from 1/2 to 6 HP now feature HyperCore™ microchannel coil technology

  • Rigid, damage resistant structure; increases coil life
  • Monometal (aluminum) construction avoids galvanic corrosion and offers a significant weight advantage
  • Reduces required refrigerant charge
  • Reduces braze operations (1) vs RTPF (50 to 100) and thus the likelihood of leaks

Standard Features:

  • Motors rated for 50 and 60 cycle application
  • Fans specifically matched with motor and coil to attain maximum air movement and cooling
  • Prepainted G90 galvanized cabinets for superior strength and corrosion protection including hoods for outdoor units
  • Heavy duty steel raised base with 1 1/2" legs
  • A receiver with fusible plug, liquid shutoff valve and charging port is also standard.
  • Discharge service valves on all compressors
  • Large electrical panel for ease of access
  • Prefabricated wiring harnesses for tight connections and to simplify service
  • Encapsulated, auto-reset, high pressure controls to eliminate leaks
  • All units completely leak tested in a helium environment and run tested. Each unit will have a copy of the run data shipped inside the electrical panel.
  • Crankcase heater
  • Flooded head pressure control valve
  • Liquid line drier, sight glass
    Many optional features available


  • Suction service valves located outside the cabinet for quick installations.
  • Encapsulated auto reset low pressure control
  • Models 1 HP and smaller (RS compressor) not suitable for R507 applications
Please wait. Loading Replacement Parts..
Please wait. Loading Substitute Parts..
Please wait. Loading Supersedes Parts..
Installation Instructions

Specification Sheet