Condensing unit, air cooled, hermetic compressor, outdoor, medium/low temp, R404A, R507, 3/4 HP, 208-230/1/60
Please note a newer model exists for this Part Number. Please see the Supersedes tab.
Motor Freight
Engineered Items
Regional
URI Part Number:
LHT008X6B
Vendor Name:
Larkin
Length (In.):
28 1/4
Width (In.):
23 3/4
Compressor:
RS55C2ECAV
Connection Liquid (In.):
3/8
Connection Suction (In.):
1/2
Connection Type:
ODS
Height (In.):
17 1/4
Horsepower:
3/4
MCA (Amps):
15
Oil:
Polyol Ester
Oil_short:
POE
Receiver Capacity 90 % Full (Lbs.):
5.5
Refrigerant:
R404A, R507
Sort:
2.0
Voltage:
208-230/1/60
Shipping Weight (Lbs.):
135
LH, LS, LZ units from 1/2 to 6 HP now feature HyperCore™ microchannel coil technology
Rigid, damage resistant structure; increases coil life
Monometal (aluminum) construction avoids galvanic corrosion and offers a significant weight advantage
Reduces required refrigerant charge
Reduces braze operations (1) vs RTPF (50 to 100) and thus the likelihood of leaks
Standard Features:
Motors rated for 50 and 60 cycle application
Fans specifically matched with motor and coil to attain maximum air movement and cooling
Prepainted G90 galvanized cabinets for superior strength and corrosion protection including hoods for outdoor units
Heavy duty steel raised base with 1 1/2" legs
A receiver with fusible plug, liquid shutoff valve and charging port is also standard.
Discharge service valves on all compressors
Large electrical panel for ease of access
Prefabricated wiring harnesses for tight connections and to simplify service
Encapsulated, auto-reset, high pressure controls to eliminate leaks
All units completely leak tested in a helium environment and run tested. Each unit will have a copy of the run data shipped inside the electrical panel.
Crankcase heater
Flooded head pressure control valve
Liquid line drier, sight glass Many optional features available
Suction service valves located outside the cabinet for quick installations.
Encapsulated auto reset low pressure control
Models 1 HP and smaller (RS compressor) not suitable for R507 applications