Catalog pricing shown. Please log in to see your pricing.

TEZA015H8HT3DBGF

TEZA015H8HT3DBGF
Available to Order
Ready to Ship
Condensing unit, air cooled, Copeland Scroll, TEZA Line, High Temperature, Outdoor, R407A, R407C, R404A, R507, R448A, 1.5 HP, 208-230/3/60, w/ receiver
Vendor Name:
Trenton Refrigeration Products
URI Part Number:
TEZA015H8HT3DBGF
Vendor Part Number:
TEZA015H8-HT3D-B-GF
Length (In.):
30.375
Width (In.):
36.375
Height (In.):
19.875
Shipping Weight (Lbs.):
285
Application:
High Temp
Compressor:
Copeland
Connection Liquid (In.):
3/8
Connection Suction (In.):
5/8
Features:
Sealed liquid line filter drier and sight glass
Horsepower:
1.5
Maximum Fuse:
20
MCA (Amps):
13.225
Receiver Capacity 90 % Full (Lbs.):
11
Receiver Included:
Yes
Refrigerant:
R407A, R407C, R404A, R507, R448A
Voltage:
208-230/3/60
Prop65:
WARNING: This product can expose you to chemicals including Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Indoor Unit:

  • Copeland scroll compressor
  • Compatible with Low GWP Refrigerants
  • Weatherproof electrical control box with compressor contactor and fused control circuit
  • High efficiency enhanced tube and fin condenser design
  • SmartSpeed EC Fan Motor Technology standard on models using chassis 1
  • Energy efficient PSC condenser fan motor on models using chassis 2 thru 6
  • Receiver with fusible plug and liquid shut off valve
  • Suction service valve
  • Pre-formed copper tubing
  • Liquid injection (low temp. models)
  • Unit leak tested and shipped with helium holding charge
  • Fixed high pressure switch and adjustable low pressure control
  • Receiver inlet valve on 2-fan units models only
  • Discharge thermostat on applicable models only

Outdoor Unit, all standard features of indoor unit plus:

  • Painted cabinet
  • Flooded head pressure control (adjustable)
  • Crankcase heater
  • Fan cycling control with flex hose (2 fan units)
  • Packages:
    • B: Sealed liquid line filter drier, sight glass
    • D: Sealed liquid line filter drier, sight glass, heated and insulated receiver
    • N: Sealed liquid line filter drier, sight glass, suction accumulator (w/out heat exchanger)
    • J: Sealed liquid line filter drier, sight glass, suction accumulator (w/out heat exchanger), heated and insulated receiver
    • P: Sealed liquid line filter drier, sight glass, suction accumulator (w/out heat exchanger), suction filter, non-fused disconnect
    • Q: Sealed liquid line filter drier, sight glass, suction accumulator (w/out heat exchanger), suction filter, non-fused disconnect, heated and insulated receiver


  • See Document Tab on URI.com for AWEF-compliant applications and capacities
Specification Sheet

Installation Instructions