Vendor Name:

LRC

URI Part Number:

RM50EC

Vendor Part Number:

RM-50EC

Length (In.):

36

Width (In.):

11

Height (In.):

14 3/8

Shipping Weight (Lbs.):

37.00

Amps:

1.25

Application:

Medium Temp

Capacity R134a:

4,550.0

Capacity R22:

4,996.0

Capacity R404A:

4,723.0

CFM:

335

Connection Liquid (In.):

3/8

Connection Suction (In.):

5/8

Voltage:

115/1/60

Prop65:

Warning: the only harmful routes of exposure for this product is through inhalation and ingestion of this product. THIS PRODUCT IS NOT DESIGNED OR MEANT TO BE INHALED OR INGESTED. The only route of exposure that this product is meant for is dermal exposure (skin contact). Consumers face no significant risk to chemicals that are known to the State of California to cause cancer and/or reproductive harm from dermal exposure to this product. For more information, go to www.Prop65Warning.ca.gov

LRC’s Energy Efficient Rack Mount (RM-EC) Evaporators are designed for installation inside a wine rack or between two ceiling joists. RM-EC Evaporators quietly supplies refrigerated and humidity controlled air to medium and high temperature spaces, making them an ideal choice for small to medium size wine rooms.
RM units have multiple access doors that can be removed as needed for air intake and exhaust depending on how the unit is installed. RM-EC airflow can be adjusted through the unit to maintain room humidity within desired range.

• Can be used with R-22, R134a, R404a, or other refrigerants.
• Low noise design for minimum acoustical impact
• Compact design allows unit to be inconspicuously integrated into a wine room decor
• Energy efficient EC motors meet or exceed California energy standards
• High performance staggered coils, with copper tubing mechanically expanded into aluminum collared fins
• Provides consistent humidity by maintaining a steady coil temperature, reducing the need for expensive temperature and humidity controls in most applications
• Insulated rust-proof aluminum housing. Flat black powder coated finish available
• Thermally protected motors
• Each coil pressure tested to over 380 psig for maximum system integrity
• Factory wired for easy field installation
• Expansion and liquid line solenoid valve pre-installed
• rainpan made of non-corrosive material
• Coil and drain pan coated with LRCCoat™ anticorrosion coating
• Capacities rated at 38°F suction temperature, 55° room temperature, 17°F TD