BEC0135BY6EMAB0000

Engineered Items :

Yes

LTL Only :

Yes

SKU :

BEC0135BY6EMAB0000

Vendor Name:

Bohn

Voltage :

208-230

Web Description :

A2L Center mount evaporator, dual flow, Air Defrost, Low/Medium Temp, 13500 BTUH, 208-230/1/60

Branch Pickup Only :

No

Weight :

214.0 lb

Fins/Inch :

6

CFM :

1830

LogoImage :

L/Logo_BOHN.jpg

Motor Type :

2 Speed EC

Heater Amps :

1.3

Heater Watts :

165

manufacturerSKU :

BEC0135BY6EMAB0000

Specials :

No

Horsepower :

1/20

Phase :

1

longDescription :

Cabinet

• Air moves across the ceiling in both directions providing even air distribution throughout the cooler
• Compact, ceiling mount and center mount design allows for shelving and storage of product around all walls
• Heavy-gauge grained aluminum cabinet cleans easily and looks attractive
• Cabinet design features improved access panels on each end for easy access to electrical and refrigeration components
• Captive stainless steel screws for easy service which prevent dropping/loss and prevent rust streaks or staining
• Improved wire management and routing
• Quick disconnect, waterproof plug and receptacle for each motor in all models
• Molded fan guard is made of strong, durable, NSF and UL Sanitation rated lightweight and damage resistant plastic material
• Liquid line solenoid wire harness is factory-installed for quick installation

Coil

• High-efficiency aluminum fins with full collars cover mechanically expanded copper tubes
• Coils are dehydrated and sealed at the factory
• Electric defrost models incorporate high quality tubular heaters and a standard fixed defrost termination thermostat
• Generous coil surface gives proper compressor balance
• Standard adjustable defrost termination fan delay thermostat
• Internally enhanced tubing and fin design for higher efficiency
• Optimized heater placement with reduced heater wattages
• Fixed defrost termination for electric, adjustable defrost termination for hot gas

Drain Pan

• Hinged drain pan for faster, easier and safer access and serviceability
• Tapered mounting provides proper slope for condensate drainage to one end of the unit
• Double drain pan eliminates drain pan sweating

Motor

• Motor rail is design for maximum strength and durability
• Motors are life lubricated and thermal overload protected
• 2 Speed EC Motors are factory-installed

• A2L and A1 dual refrigerants compatible models
• Factory mounted Refrigerant Detection System (RDS)
• Base model option available with or without RDS
• Field mounted Refrigerant Detection System kit available.
• Protection grill for evaporator coil
• Piping protection guards for refrigerant line connections
• Red tags on service valves and connection points as indicators for A2L refrigerants
• A2L labels to meet regulatory requirement

manufacturerName :

Bohn

Number of Fans :

3

Application :

Medium Temp

Sort :

5.0

URI Part Number:

BEC0135BY6EMAB0000

Vendor Part Number:

BEC0135BY6EMAB0000

Length (In.):

183.00

Width (In.):

73.00

Height (In.):

39.50

Connection Size Inlet (In.):

3/8

Connection Suction (In.):

1 1/8

Shipping Weight (Lbs):

214.00

Prop65:

WARNING: Cancer and Reproductive Harm- For more information go to www.P65Warnings.ca.gov

Weight (Lbs):

214.00

Cabinet

• Air moves across the ceiling in both directions providing even air distribution throughout the cooler
• Compact, ceiling mount and center mount design allows for shelving and storage of product around all walls
• Heavy-gauge grained aluminum cabinet cleans easily and looks attractive
• Cabinet design features improved access panels on each end for easy access to electrical and refrigeration components
• Captive stainless steel screws for easy service which prevent dropping/loss and prevent rust streaks or staining
• Improved wire management and routing
• Quick disconnect, waterproof plug and receptacle for each motor in all models
• Molded fan guard is made of strong, durable, NSF and UL Sanitation rated lightweight and damage resistant plastic material
• Liquid line solenoid wire harness is factory-installed for quick installation

Coil

• High-efficiency aluminum fins with full collars cover mechanically expanded copper tubes
• Coils are dehydrated and sealed at the factory
• Electric defrost models incorporate high quality tubular heaters and a standard fixed defrost termination thermostat
• Generous coil surface gives proper compressor balance
• Standard adjustable defrost termination fan delay thermostat
• Internally enhanced tubing and fin design for higher efficiency
• Optimized heater placement with reduced heater wattages
• Fixed defrost termination for electric, adjustable defrost termination for hot gas

Drain Pan

• Hinged drain pan for faster, easier and safer access and serviceability
• Tapered mounting provides proper slope for condensate drainage to one end of the unit
• Double drain pan eliminates drain pan sweating

Motor

• Motor rail is design for maximum strength and durability
• Motors are life lubricated and thermal overload protected
• 2 Speed EC Motors are factory-installed

• A2L and A1 dual refrigerants compatible models
• Factory mounted Refrigerant Detection System (RDS)
• Base model option available with or without RDS
• Field mounted Refrigerant Detection System kit available.
• Protection grill for evaporator coil
• Piping protection guards for refrigerant line connections
• Red tags on service valves and connection points as indicators for A2L refrigerants
• A2L labels to meet regulatory requirement