Catalog pricing shown. Please log in to see your pricing.

LET075BWMC6K

LET075BWMC6K
Unit cooler, walk-in, 6 FPI, electric defrost, low profile, pre-assembled, PSC motors, 7500 BTUH -20°F, 208-230/1/60 volt, 15" H x 15" W x 45-1/2" L
Please note an alternative model exists for this Part Number. Please see the Supersedes tab.
Vendor Name:
Bohn
URI Part Number:
LET075BWMC6K
Vendor Part Number:
LET075BWMC6K
Length (In.):
45.5
Width (In.):
15
Height (In.):
15
Shipping Weight (Lbs.):
67
Application:
Low Temp, Medium Temp
BTUH 20°F at 10°F T.D.:
8600
BTUH -20°F at 10°F T.D.:
7,500
CFM:
1300
Connection Size Inlet (In.):
1/2
Connection Suction (In.):
7/8
Connection Type:
ODS
Fins/Inch:
6
Heater Amps:
7.8
Heater Watts:
1800
Motor Type:
PSC
Number of Motors:
2
Voltage:
208-230/1/60
Prop65:
WARNING: Cancer and Reproductive Harm- For more information go to www.P65Warnings.ca.gov

Designed to maintain room temperatures from -20°F to +34°F. Their low silhouette and flush-to-ceiling mounting makes them ideal for use in low ceiling freezers or coolers with limited headroom. Use LET (6 FPI) in rooms where light or medium frost loads are expected. Use LLE (4 FPI) in rooms with heavy frost loads. Features include heavy aluminum casing and stainless steel screws for corrosion resistance, molded fan guards for ease in cleaning and directional air flow, and complete factory wiring of defrost components.
New design allows easy front access to electrical and refrigeration components. More volume in electrical cavity for component installation. Heaters are attached to coil... no need to disconnect from electrical board to drop drain pan

  • MK models ship with PSC motors; BEK models ship with electronically commutated motors (EC)
  • Height: 15" + drain pan slope and spud
  • Depth: 12" + fan guard (6")
  • Capacity 10°F T.D.


  • Pre-assembled: expansion valve, solenoid valve and temperature control are mounted and wired.
Please wait. Loading Supersedes Parts..
Installation Instructions

Specification Sheet