Catalog pricing shown. Please Sign In to see your pricing.

DV55SPP-NAT

DV55SPP-NAT
Wall furnace, direct vent, counterflow, natural gas, electronic pilot, 55,000 input BTUH, 16" W x 11 5/16" D x 82-3/8" H
Please note an alternative model exists for this Part Number. Please see the Supersedes tab.
Vendor Name:
Empire Heating Systems
URI Part Number:
DV55SPP-NAT
Vendor Part Number:
DV55SPP
Depth (In.):
11 5/16
Width (In.):
16
Height (In.):
82 3/8
Shipping Weight (Lbs.):
140
CFM:
400
Gas:
Natural
Input (BTUH):
55,000
Pilot Type:
Standing
Prop65:
WARNING: Cancer and Reproductive Harm- For more information go to www.P65Warnings.ca.gov

Clean and cost-efficient comfort makes these the perfect heaters to add soothing atmospheric warmth to your smaller-size rooms. The slim, compact design of each unit allows it to tuck out of the way on any outside wall. The complete line of Empire direct vent wall furnaces is specifically designed for placement in areas where flues or chimneys are not available or cannot be used. One hole through the outside wall is all you need. Plus, Empire direct vent heaters have removable front panels for cleaning and servicing. With a direct vent system, there is a positive difference in fuel economy because outside air is used to support combustion. The air on the inside is warmed as it recirculates around a sealed chamber. This warm air comfortably heats the room cleanly and efficiently. Empire’s secret to Quieter operation is our uniquely designed burner. As gas enters the burner port, it is ignited immediately, which eliminates delayed ignition noise and gives you Quieter operation.
Safety is the key factor to every Empire direct vent furnace. Each unit contains an automatic shut-off valve should the pilot light become extinguished. And, Empire’s factory-based quality control procedures assure you that every heater is a top performer before it goes into your home.
Quiet burners, a matchless piezo ignition and all the safety features you expect from Empire Comfort

  • Total warmth for a fraction of the cost of electric heat
  • No electricity needed for millivolt wall thermostat operation
  • Optional automatic blower available for more even heat distribution
  • Cost-efficient installation
    All Empire products shown have a 10 year warranty on the combustion chamber, 1 year limited warranty on parts.

Venting

Wall thickness: 4 1/2" to 13" (19" with vent tube extension kit); 3/4" to 10" for DVC35, 4 1/2" to 12" for MV Series (18" with extension kit)
Vent opening: DV210, 215: 6 1/4"; DV25, 35, DV55, DVC35: 7 1/2"; MV120: 5 1/2"; MV130: 6 3/4"; MV145: 8 1/2"
Combustibles clearance: Top DV210, 215: 12"; DV25, 35: 48"; DV55, DVC35: 4"; MV Series: 36" Side DV210, 215: 1"; DV25, 35 - 6"; DV55, DVC35: 4" (18" for side outlet); MV Series: 4"



Applications for both models outside wall. In addition, the DVC35 may be recessed 9 1/2" between studs and the DV55 4".

Replacement Parts Supersedes

Related Products