Catalog pricing shown. Please Sign In to see your pricing.

R020M1IT3

R020M1IT3
Call To Order
Receiver unit, remote cooled, semi-hermetic compressor, indoor, medium/high temp, R134a, 2 HP, 208-230/3/60
Vendor Name:
Trenton Refrigeration Products
URI Part Number:
R020M1IT3
Length (In.):
30 1/2
Width (In.):
17 1/2
Height (In.):
27 1/2
Shipping Weight (Lbs.):
365
Compressor:
EAVA021ETAC
Connection Discharge (In.):
1/2
Connection Liquid (In.):
3/8
Connection Suction (In.):
7/8
Connection Type:
ODS
Horsepower:
2
MCA (Amps):
9.3
Mount (In.):
12 x 13
Oil:
Polyol Ester
Receiver Capacity 90 % Full (Lbs.):
27
Receiver liquid Connection In (In.):
1/2
Refrigerant:
R134a
Voltage:
208-240/3
Prop65:
WARNING: This product can expose you to chemicals including Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Designed for use with a remote air-cooled condenser. The R condensing unit is typically used in applications where indoor space is at a premium and in supermarket and large warehouse areas. Consisting of high efficiency accessible semi-hermetic compressors, the R unit is available with options suited to your specific needs.

Standard Features

Include:

  • Sturdy electrical control box with compressor contactor and fused control circuit
  • Spring mounted, accessible semi-hermetic compressor
  • Compressor cooling fan (low temp. models and air cooled compressors only)
  • Discharge vibration eliminator
  • Receiver with fusible plug and liquid shut off valve
  • Adjustable dual high/low pressure control
  • Suction and discharge service valves

Optional Features

(Factory Mounted):
  • Suction accumulator with or without heat exchanger
  • Sealed or replaceable core suction filter with vibration eliminator
  • Oil separator c/w oil return solenoid valve
  • Over-sized receiver
  • Receiver inlet valve
  • Discharge vibration eliminator
  • Sealed liquid line filter drier and sight glass (to 5 HP)
  • Liquid line solenoid valve w/230 volt coil (shipped loose)
  • Ball valve (shipped loose)
  • Two valve adjustable flooded head pressure control
  • Replaceable core liquid line filter drier
  • Flex hose on all controls
  • Compressor circuit breaker
  • Compressor time delay relay
  • Pump down toggle switch
  • Time clock—factory mounted and wired or shipped loose
  • Defrost contactor with fuse block
  • Fused disconnect
  • Phase/voltage monitor
    OtherOptions Available at your request—call United's customer service at 888-578-9100


  • Standard Features

    • Oil failure control on all applicable models (5 HP and up)
    • Sealed liquid line filter drier and sight glass (5 HP and up)
      Optional Features (Factory Mounted)
    • Sentronic oil failure control on 5 HP units and up
    • Compressor unloading on applicable models
    Documents

    Related Products