THP072PGT3A

SKU :

THP072PGT3A

Sort :

16.0

Motor Maximum Fuse (Amps) :

15

Engineered Items :

Yes

LTL Only :

Yes

LogoImage :

L/Logo_TRENTON.jpg

Branch Pickup Only :

No

Vendor Name:

Trenton Refrigeration Products

Fins/Inch :

4

manufacturerName :

Trenton Refrigeration Products

Web Search :

evaporator walkin walk in

Motor Horsepower :

1

Heater Amps :

18.5

Web Description :

Unit cooler, walk-in, 4 FPI, hot gas defrost, reverse cycle with electric heater, 72000 BTUH +25°F ET, 208-230/3/60 volt, 53-1/32" H x 40-1/2" W x 99" L

Specials Description :

Unit cooler, walk-in, 4 FPI, hot gas defrost, reverse cycle with electric heater, 72000 BTUH +25?F ET, 208-230/3/60, 53 1/32" H x 40 1/2" W x 99" L

Heater Watts :

7350

Specials :

No

Motor MCA :

10.8

Maximum Fuse / Breaker Size (Amps) :

25

Number of Motors :

2

CFM :

16500

Heater MCA :

23.1

Weight :

731.0 lb

longDescription :

Standard Features

• Heavy gauge textured aluminum cabinet with galvanized steel hangers, support channels and end plates
• Hinged access panels with removable hinge pins and captive fasteners.
• Hinged drain pan with removable hinge pins
• Rugged heavy-gauge galvanized steel rail motor mount / support.
• Stackable design
• Schrader fitting and external equalizer line.
• Factory installed solenoid valve wire harness
• Unit shipped upright for convenient handling and quick installation.

Optional Features

• Factory mounted TX valve, solenoid valve and thermostat
• Throw boosters
• Insulated drain pan
• TEFC motors
• Optional fin spacing
• Optional fin materials
• Optional coil coating

Available in sizes from 59,000 to 256,000 BTUH.

• Adjustable defrost termination thermostat
• Heater safety thermostat
• Fixed fan delay thermostat
• Maximum fuse is for heater circuits only; motor fusing listed separately
  Standard units are equiped with an electric heater (hot gas drain pan loop optional) and are suitable for three pipe or reverse cycle applications.
  Replace (*) with letter code to completely specify required configuration
  T = 3 Pipe with Electric Heater
  G = Reverse Cycle with Electric Heater

Voltage :

208-240/3

Connection Type :

ODS

Motor Type :

ODP

Motor FLA :

9.6

URI Part Number:

THP072PGT3A

Length (In.):

99

Width (In.):

40 1/2

Height (In.):

53 1/32

Connection Size Inlet (In.):

1 1/8

Connection Suction (In.):

1 5/8

Shipping Weight (Lbs):

731.00

Prop65:

WARNING: This product can expose you to chemicals including Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Weight (Lbs):

731.00

Standard Features

• Heavy gauge textured aluminum cabinet with galvanized steel hangers, support channels and end plates
• Hinged access panels with removable hinge pins and captive fasteners.
• Hinged drain pan with removable hinge pins
• Rugged heavy-gauge galvanized steel rail motor mount / support.
• Stackable design
• Schrader fitting and external equalizer line.
• Factory installed solenoid valve wire harness
• Unit shipped upright for convenient handling and quick installation.

Optional Features

• Factory mounted TX valve, solenoid valve and thermostat
• Throw boosters
• Insulated drain pan
• TEFC motors
• Optional fin spacing
• Optional fin materials
• Optional coil coating

Available in sizes from 59,000 to 256,000 BTUH.

• Adjustable defrost termination thermostat
• Heater safety thermostat
• Fixed fan delay thermostat
• Maximum fuse is for heater circuits only; motor fusing listed separately
  Standard units are equiped with an electric heater (hot gas drain pan loop optional) and are suitable for three pipe or reverse cycle applications.
  Replace (*) with letter code to completely specify required configuration
  T = 3 Pipe with Electric Heater
  G = Reverse Cycle with Electric Heater