THP076VGT5A

Voltage :

575/3

manufacturerName :

Trenton Refrigeration Products

Heater Amps :

7.4

Engineered Items :

Yes

LTL Only :

Yes

LogoImage :

L/Logo_TRENTON.jpg

Specials Description :

Unit cooler, walk-in, 4 FPI, hot gas defrost, reverse cycle with electric heater, 76000 BTUH -20°F ET, 575/3/60, 53 1/32" H x 40 1/2" W x 99" L

Branch Pickup Only :

No

Vendor Name:

Trenton Refrigeration Products

Sort :

30.0

Fins/Inch :

4

SKU :

THP076VGT5A

Motor FLA :

4.6

Web Search :

evaporator walkin walk in

Web Description :

Unit cooler, walk-in, 4 FPI, hot gas defrost, reverse cycle with electric heater, 76000 BTUH -20°F ET, 575/3/60 volt, 53-1/32" H x 40-1/2" W x 99" L

Heater Watts :

7350

Weight :

742.0 lb

Specials :

No

Heater MCA :

9.2

longDescription :

Standard Features

• Heavy gauge textured aluminum cabinet with galvanized steel hangers, support channels and end plates
• Hinged access panels with removable hinge pins and captive fasteners.
• Hinged drain pan with removable hinge pins
• Rugged heavy-gauge galvanized steel rail motor mount / support.
• Stackable design
• Schrader fitting and external equalizer line.
• Factory installed solenoid valve wire harness
• Unit shipped upright for convenient handling and quick installation.

Optional Features

• Factory mounted TX valve, solenoid valve and thermostat
• Throw boosters
• Insulated drain pan
• TEFC motors
• Optional fin spacing
• Optional fin materials
• Optional coil coating

Available in sizes from 55,000 to 217,000 BTUH.

• Adjustable defrost termination thermostat
• Heater safety thermostat (on models with heaters)
• Fixed fan delay thermostat
  Standard units are equiped with either an electric heater or hot gas drain pan loop and are suitable for three pipe or reverse cycle applications.
  Replace (*) with letter code to completely specify required configuration
  T = 3 Pipe with Electric Heater
  G = Reverse Cycle with Electric Heater
  H = 3 Pipe with Loop
  R = Reverse Cycle with Loop

CFM :

17800

Number of Motors :

2

Motor MCA :

5.2

Comments :

Reverse Cycle w/ Heater

Connection Type :

ODS

Motor Type :

ODP

URI Part Number:

THP076VGT5A

Length (In.):

99

Width (In.):

40 1/2

Height (In.):

53 1/32

Connection Size Inlet (In.):

1 3/8

Connection Suction (In.):

2 1/8

Shipping Weight (Lbs):

742.00

Prop65:

WARNING: This product can expose you to chemicals including Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Weight (Lbs):

742.00

Standard Features

• Heavy gauge textured aluminum cabinet with galvanized steel hangers, support channels and end plates
• Hinged access panels with removable hinge pins and captive fasteners.
• Hinged drain pan with removable hinge pins
• Rugged heavy-gauge galvanized steel rail motor mount / support.
• Stackable design
• Schrader fitting and external equalizer line.
• Factory installed solenoid valve wire harness
• Unit shipped upright for convenient handling and quick installation.

Optional Features

• Factory mounted TX valve, solenoid valve and thermostat
• Throw boosters
• Insulated drain pan
• TEFC motors
• Optional fin spacing
• Optional fin materials
• Optional coil coating

Available in sizes from 55,000 to 217,000 BTUH.

• Adjustable defrost termination thermostat
• Heater safety thermostat (on models with heaters)
• Fixed fan delay thermostat
  Standard units are equiped with either an electric heater or hot gas drain pan loop and are suitable for three pipe or reverse cycle applications.
  Replace (*) with letter code to completely specify required configuration
  T = 3 Pipe with Electric Heater
  G = Reverse Cycle with Electric Heater
  H = 3 Pipe with Loop
  R = Reverse Cycle with Loop