THP076VGT5AV

Voltage :

575/3

Motor Maximum Fuse (Amps) :

15

Heater Amps :

7.4

LTL Only :

Yes

Engineered Items :

Yes

LogoImage :

L/Logo_TRENTON.jpg

Branch Pickup Only :

No

Vendor Name:

Trenton Refrigeration Products

Fins/Inch :

4

manufacturerName :

Trenton Refrigeration Products

Sort :

30.0

SKU :

THP076VGT5AV

Web Search :

evaporator walkin walk in

Motor MCA :

8.1

Maximum Fuse / Breaker Size (Amps) :

15

Web Description :

Unit cooler, walk-in, 4 FPI, hot gas defrost, hi velocity, reverse cycle with electric heater, 85000 BTUH -20°F ET, 575/3/60 volt, 53-1/32" H x 40-1/2" W x 99" L

CFM :

22800

Heater Watts :

7350

Weight :

742.0 lb

Heater MCA :

9.2

Specials :

No

Motor Horsepower :

3

Specials Description :

Unit cooler, walk-in, 4 FPI, hot gas defrost, hi velocity, reverse cycle with electric heater, 85000 BTUH -20?F ET, 575/3/60, 53 1/32" H x 40 1/2" W x 99" L

Number of Motors :

2

Motor FLA :

7.2

longDescription :

Standard Features

• Heavy gauge textured aluminum cabinet with galvanized steel hangers, support channels and end plates
• Hinged access panels with removable hinge pins and captive fasteners.
• Hinged drain pan with removable hinge pins
• Rugged heavy-gauge galvanized steel rail motor mount / support.
• Stackable design
• Schrader fitting and external equalizer line.
• Factory installed solenoid valve wire harness
• Unit shipped upright for convenient handling and quick installation.

Optional Features

• Factory mounted TX valve, solenoid valve and thermostat
• Throw boosters
• Insulated drain pan
• TEFC motors
• Optional fin spacing
• Optional fin materials
• Optional coil coating

Available in sizes from 59,000 to 242,000 BTUH.

• Adjustable defrost termination thermostat
• Heater safety thermostat (on models with heaters)
• Fixed fan delay thermostat
• Maximum fuse is for heater circuits only; motor fusing listed separately
  Standard units are equiped with an electric heater (hot gas drain pan loop optional) and are suitable for three pipe or reverse cycle applications.
  Replace (*) with letter code to completely specify required configuration
  T = 3 Pipe with Electric Heater
  G = Reverse Cycle with Electric Heater

Connection Type :

ODS

Motor Type :

ODP

URI Part Number:

THP076VGT5AV

Length (In.):

99

Width (In.):

40 1/2

Height (In.):

53 1/32

Connection Size Inlet (In.):

1 3/8

Connection Suction (In.):

2 1/8

Shipping Weight (Lbs):

742.00

Prop65:

WARNING: This product can expose you to chemicals including Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Weight (Lbs):

742.00

Standard Features

• Heavy gauge textured aluminum cabinet with galvanized steel hangers, support channels and end plates
• Hinged access panels with removable hinge pins and captive fasteners.
• Hinged drain pan with removable hinge pins
• Rugged heavy-gauge galvanized steel rail motor mount / support.
• Stackable design
• Schrader fitting and external equalizer line.
• Factory installed solenoid valve wire harness
• Unit shipped upright for convenient handling and quick installation.

Optional Features

• Factory mounted TX valve, solenoid valve and thermostat
• Throw boosters
• Insulated drain pan
• TEFC motors
• Optional fin spacing
• Optional fin materials
• Optional coil coating

Available in sizes from 59,000 to 242,000 BTUH.

• Adjustable defrost termination thermostat
• Heater safety thermostat (on models with heaters)
• Fixed fan delay thermostat
• Maximum fuse is for heater circuits only; motor fusing listed separately
  Standard units are equiped with an electric heater (hot gas drain pan loop optional) and are suitable for three pipe or reverse cycle applications.
  Replace (*) with letter code to completely specify required configuration
  T = 3 Pipe with Electric Heater
  G = Reverse Cycle with Electric Heater