THP145VTT4AV

Motor Maximum Fuse (Amps) :

20

Engineered Items :

Yes

LTL Only :

Yes

LogoImage :

L/Logo_TRENTON.jpg

Branch Pickup Only :

No

Web Description :

Unit cooler, walk-in, 4 FPI, hot gas defrost, hi velocity, 3-pipe with electric heater, 162000 BTUH -20°F ET, 460/3/60 volt, 53-21/32" H x 40-1/2" W x 162" L

Heater Amps :

13.6

Vendor Name:

Trenton Refrigeration Products

Fins/Inch :

4

CFM :

34300

Web Search :

evaporator walkin walk in

Specials Description :

Unit cooler, walk-in, 4 FPI, hot gas defrost, hi velocity, 3-pipe with electric heater, 162000 BTUH -20?F ET, 460/3/60, 53 21/32" H x 40 1/2" W x 162" L

Maximum Fuse / Breaker Size (Amps) :

20

Weight :

1,219.0 lb

Specials :

No

Motor Horsepower :

3

Heater Watts :

10800

SKU :

THP145VTT4AV

Sort :

86.0

Heater MCA :

16.9

Motor FLA :

13.2

Motor MCA :

15.1

Voltage :

460/3

Number of Motors :

3

Connection Type :

ODS

longDescription :

Standard Features

• Heavy gauge textured aluminum cabinet with galvanized steel hangers, support channels and end plates
• Hinged access panels with removable hinge pins and captive fasteners.
• Hinged drain pan with removable hinge pins
• Rugged heavy-gauge galvanized steel rail motor mount / support.
• Stackable design
• Schrader fitting and external equalizer line.
• Factory installed solenoid valve wire harness
• Unit shipped upright for convenient handling and quick installation.

Optional Features

• Factory mounted TX valve, solenoid valve and thermostat
• Throw boosters
• Insulated drain pan
• TEFC motors
• Optional fin spacing
• Optional fin materials
• Optional coil coating

Available in sizes from 59,000 to 242,000 BTUH.

• Adjustable defrost termination thermostat
• Heater safety thermostat (on models with heaters)
• Fixed fan delay thermostat
• Maximum fuse is for heater circuits only; motor fusing listed separately
  Standard units are equiped with an electric heater (hot gas drain pan loop optional) and are suitable for three pipe or reverse cycle applications.
  Replace (*) with letter code to completely specify required configuration
  T = 3 Pipe with Electric Heater
  G = Reverse Cycle with Electric Heater

Motor Type :

ODP

manufacturerName :

Trenton Refrigeration Products

URI Part Number:

THP145VTT4AV

Length (In.):

145

Width (In.):

40 1/2

Height (In.):

56 21/32

Connection Size Inlet (In.):

1 5/8

Connection Suction (In.):

2 5/8

Shipping Weight (Lbs):

1219.00

Prop65:

WARNING: This product can expose you to chemicals including Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Weight (Lbs):

1219.00

Standard Features

• Heavy gauge textured aluminum cabinet with galvanized steel hangers, support channels and end plates
• Hinged access panels with removable hinge pins and captive fasteners.
• Hinged drain pan with removable hinge pins
• Rugged heavy-gauge galvanized steel rail motor mount / support.
• Stackable design
• Schrader fitting and external equalizer line.
• Factory installed solenoid valve wire harness
• Unit shipped upright for convenient handling and quick installation.

Optional Features

• Factory mounted TX valve, solenoid valve and thermostat
• Throw boosters
• Insulated drain pan
• TEFC motors
• Optional fin spacing
• Optional fin materials
• Optional coil coating

Available in sizes from 59,000 to 242,000 BTUH.

• Adjustable defrost termination thermostat
• Heater safety thermostat (on models with heaters)
• Fixed fan delay thermostat
• Maximum fuse is for heater circuits only; motor fusing listed separately
  Standard units are equiped with an electric heater (hot gas drain pan loop optional) and are suitable for three pipe or reverse cycle applications.
  Replace (*) with letter code to completely specify required configuration
  T = 3 Pipe with Electric Heater
  G = Reverse Cycle with Electric Heater