THP172VGT4A

Engineered Items :

Yes

LTL Only :

Yes

LogoImage :

L/Logo_TRENTON.jpg

Weight :

1,505.0 lb

Branch Pickup Only :

No

Heater Amps :

17.7

Number of Motors :

4

Vendor Name:

Trenton Refrigeration Products

Fins/Inch :

4

Web Search :

evaporator walkin walk in

CFM :

38100

Motor FLA :

11.2

Web Description :

Unit cooler, walk-in, 4 FPI, hot gas defrost, reverse cycle with electric heater, 172000 BTUH -20°F ET, 460/3/60 volt, 57-9/32" H x 40-1/2" W x 187" L

Specials Description :

Unit cooler, walk-in, 4 FPI, hot gas defrost, reverse cycle with electric heater, 172000 BTUH -20°F ET, 460/3/60, 57 9/32" H x 40 1/2" W x 187" L

manufacturerName :

Trenton Refrigeration Products

Specials :

No

longDescription :

Standard Features

• Heavy gauge textured aluminum cabinet with galvanized steel hangers, support channels and end plates
• Hinged access panels with removable hinge pins and captive fasteners.
• Hinged drain pan with removable hinge pins
• Rugged heavy-gauge galvanized steel rail motor mount / support.
• Stackable design
• Schrader fitting and external equalizer line.
• Factory installed solenoid valve wire harness
• Unit shipped upright for convenient handling and quick installation.

Optional Features

• Factory mounted TX valve, solenoid valve and thermostat
• Throw boosters
• Insulated drain pan
• TEFC motors
• Optional fin spacing
• Optional fin materials
• Optional coil coating

Available in sizes from 55,000 to 217,000 BTUH.

• Adjustable defrost termination thermostat
• Heater safety thermostat (on models with heaters)
• Fixed fan delay thermostat
  Standard units are equiped with either an electric heater or hot gas drain pan loop and are suitable for three pipe or reverse cycle applications.
  Replace (*) with letter code to completely specify required configuration
  T = 3 Pipe with Electric Heater
  G = Reverse Cycle with Electric Heater
  H = 3 Pipe with Loop
  R = Reverse Cycle with Loop

Sort :

101.0

Motor MCA :

11.9

SKU :

THP172VGT4A

Heater MCA :

22.1

Comments :

Reverse Cycle w/ Heater

Voltage :

460/3

Heater Watts :

14100

Connection Type :

ODS

Motor Type :

ODP

URI Part Number:

THP172VGT4A

Length (In.):

187

Width (In.):

40 1/2

Height (In.):

57 9/32

Connection Size Inlet (In.):

1 5/8

Connection Suction (In.):

2 5/8

Shipping Weight (Lbs):

1505.00

Prop65:

WARNING: This product can expose you to chemicals including Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Weight (Lbs):

1505.00

Standard Features

• Heavy gauge textured aluminum cabinet with galvanized steel hangers, support channels and end plates
• Hinged access panels with removable hinge pins and captive fasteners.
• Hinged drain pan with removable hinge pins
• Rugged heavy-gauge galvanized steel rail motor mount / support.
• Stackable design
• Schrader fitting and external equalizer line.
• Factory installed solenoid valve wire harness
• Unit shipped upright for convenient handling and quick installation.

Optional Features

• Factory mounted TX valve, solenoid valve and thermostat
• Throw boosters
• Insulated drain pan
• TEFC motors
• Optional fin spacing
• Optional fin materials
• Optional coil coating

Available in sizes from 55,000 to 217,000 BTUH.

• Adjustable defrost termination thermostat
• Heater safety thermostat (on models with heaters)
• Fixed fan delay thermostat
  Standard units are equiped with either an electric heater or hot gas drain pan loop and are suitable for three pipe or reverse cycle applications.
  Replace (*) with letter code to completely specify required configuration
  T = 3 Pipe with Electric Heater
  G = Reverse Cycle with Electric Heater
  H = 3 Pipe with Loop
  R = Reverse Cycle with Loop